Big Yank Handle Puller

This Works On Handles That Arent Too Stuck But The Handles Are Are Really Stuck The Arms Will Just Bend Out.

Attempted to pull the shower diverter handle from a Central Brass valve. This was my first use of this handle puller. The smaller diameter shift is too short, causing the larger diameter to "bottom out" against the handle making this completely useless. Likely works well on short stems but I don't want to carry several different handle pullers.

Having destroyed 3 of the cheapo pullers sold by the orange place and the yellow place across town, I decided to look for something more heavy duty. Finally got a chance to use this after buying it 2 months ago. It works well and seems to be higher quality than the other stuff. In addition, I'm quite pleased with SupplyHouse. They got it to me in 2 or 3 days. Don't remember for sure as it has been 2 months. I would certainly buy from them again.

I pulled on the handle to the point I thought I was going to pull the shower body through the tiles ... It wouldn't come loose ... I put this on and with minimal effort the handle popped off ... I loosened the screw few turns and put into the center of that ... Maybe I loosened it last time but don't really think so!

I used this to remove the knobs of a 20 year old central brass faucet. Significant force was needed to remove. Without this tool, they would never have come off. This tool is made strong enough not to break / bend / strip when pushed. I had to manually hold the hooked arms in position, perpendicular to the top of the tool while turning the handle so maximum force could be applied to the handles.