ProPEX EP Tees are engineered polymer fittings that make diverting connections for Uponor PEX tubing in supply and return mains. Uponor lists the tees in eight sizes, from 1/2" PEX (Q4755050) through 3" PEX (Q4753000). Each tee uses the ASTM F1960 connection shared across the ProPEX EP line, which serves hot and cold domestic potable water, residential fire sprinkler, and hydronic radiant heating and cooling systems. Installation requires a ProPEX tool, and ProPEX rings are sold separately, so rings belong on the same order as the tees. A tee is the point where a branch leaves the main, so the size chosen at that point shapes the layout of the rest of the system. Picking the right size early keeps mains and branches consistent and avoids rework on site. Matching each tee to the tubing size on the plans also keeps the parts list accurate.
Subcategories
Buying Guide
Start with the main. A tee has to match the Uponor PEX tubing it connects, so read the tubing size first. Uponor lists ProPEX EP tees in 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", and 3" PEX, each with its own part number. Q4757575, for example, is the 3/4" PEX x 3/4" PEX x 3/4" PEX tee.
Then, decide whether the branch matches the main on ProPEX EP Tees. When the branch is smaller, Uponor groups ProPEX EP reducing tees separately, and the branch size is specified last in the part nomenclature. Reading the part number carefully prevents ordering a matching-size tee where a reducing tee belongs.
Confirm the installation hardware next. Uponor states that a ProPEX tool is required and that ProPEX rings are sold separately, so every tee order needs rings and a compatible tool on hand. For 2" PEX, Uponor also publishes a technical bulletin on minimum cut length, which is worth reading before the first cut.
Finally, check the system type. ProPEX EP fittings serve hot and cold domestic potable water, residential fire sprinkler, and hydronic radiant heating and cooling systems, and the line uses the ASTM F1960 connection. Because the tees share that connection with the other EP fittings, elbows, couplings, and plugs from the same line can finish the run.
Frequently Asked Questions
What sizes do ProPEX EP tees come in?
Uponor lists ProPEX EP Tees in 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", and 3" PEX. Q4755050 is the 1/2" size and Q4753000 is the 3" size. Match the tee to the tubing on the main.
Do ProPEX EP tees need a special tool?
Yes. Uponor states that a ProPEX tool is required for ProPEX EP tees, and ProPEX rings are sold separately. Both should be on the order before the job starts.
What are ProPEX EP tees used for?
ProPEX EP Tees make diverting connections for Uponor PEX tubing in supply and return mains. They are made of engineered polymer and use the ASTM F1960 connection. Installers use them wherever a branch needs to leave a main.
How do I read a ProPEX EP tee part number?
Uponor specifies the branch size last in the part nomenclature for ProPEX EP tees. For example, Q4757575 is a 3/4" PEX x 3/4" PEX x 3/4" PEX tee. Check the full description before ordering to avoid a size mismatch.
What systems can ProPEX EP tees go in?
Uponor lists the ProPEX EP line for hot and cold domestic potable water, residential fire sprinkler, and hydronic radiant heating and cooling systems. ProPEX EP Tees belong to that line. Confirm the project spec and local code before selecting fittings.