Ridgid Drain Cable Head Attachments are the cutters and augers that mount on a drain cleaning cable to break through stoppages. RIDGID heads are matched to specific machines, such as the K-60SP sectional machine, the K-50 sectional machine, and the K-3800 drum machine. The T-107 1-3/4 inch spade cutter, for example, fits 7/8 inch sectional cables or 1/2 inch inner core cables. Head style depends on the blockage: a C-cutter for grease blockages, a straight auger for exploring stoppages, and a retrieving auger for broken or lost cable. Drain techs run an auger first, and the T-107 spade cutter is designed for use after augers to help open floor drains. Matching head, machine, and cable type before the job starts is what keeps a service call on schedule.
Subcategories
Buying Guide
Start with the machine. The heads shown here are matched to specific RIDGID machines, so confirm the model first. The T-107 spade cutter and T-101 straight auger list K-60SP sectional and K-3800 drum machines, the T-230 C-cutter lists the K-50, and the T-205 and T-225 cover K-40 and K-45 sink machines along with the K-50 and K-3800.
Next, check cable size. The T-107 and T-101 fit 7/8 inch sectional cables or 1/2 inch inner core cables, while the T-205 and T-225 fit 3/8 inch IC, 3/8 inch IW, and 1/2 inch IW cables. Confirm the cable type before ordering. Sizes also differ by head, from the 1-3/8 inch T-205 to the 2 inch T-230, so check cutter diameter against the pipe.
Then match Ridgid Drain Cable Head Attachments to the blockage. Grease in lines leading from a garbage disposal or waste pipe points to a C-cutter, such as the T-205 or the T-230. An unknown stoppage calls for a straight auger first, since it explores and returns samples that show which tool to use next. A spade cutter follows an auger on floor drains. When a cable breaks or gets lost, a retrieving auger like the T-225 is built for that search.
Machine, cable, and blockage type, in that order, cut mismatches and repeat trips on the job.
Frequently Asked Questions
What machines do Ridgid drain cable head attachments fit?
Ridgid drain cable head attachments are matched to specific machines. The T-107 and T-101 list K-60SP sectional and K-3800 drum machines, and the T-205 lists K-40, K-45, K-50, K-3800, and K-400 machines. Check each model's compatibility before ordering.
Which head do I use for grease blockages?
A C-cutter is the head listed for grease blockages in lines leading from a garbage disposal unit or waste pipe. The T-205 is a 1-3/8 inch C-cutter, and the T-230 is a 2 inch high definition C-cutter for the K-50. Ridgid drain cable head attachments in C-cutter style are chosen when grease is the problem.
What cable sizes does the T-107 spade cutter fit?
The T-107 1-3/4 inch spade cutter fits 7/8 inch sectional cables or 1/2 inch inner core cables. It works with K-60SP sectional machines or K-3800 drum machines. Among Ridgid drain cable head attachments, it's the spade cutter listed for use after augers on floor drains.
What do I use when a cable breaks off in the line?
Ridgid drain cable head attachments for retrieval, like the T-225 straight retrieving auger, are designed for searching for cable that is broken or lost in the drain line. It fits 3/8 inch IC, 3/8 inch IW, and 1/2 inch IW cables and works with K-40, K-45, K-50, and K-3800 machines.
What is the T-101 straight auger for?
The T-101 straight auger is designed for exploring stoppages and returning samples to determine the tool needed next. Among Ridgid drain cable head attachments, that makes it a practical first head on an unknown stoppage. It fits K-60SP sectional machines and K-3800 drum machines.