S-30 Series 1/3 HP is a group of Liberty Pumps sump pumps designed to handle the problem areas of sump pumps in new home construction. The series is powered by a 1/3 hp motor, and larger impeller clearances improve solids and debris handling. The S37 motor is oil filled and thermally protected. The automatic models on this page list 115V power, a 10 ft cord, a 25 ft shutoff head and 41 GPM at 5 ft head. The S37 lists a 1-1/2" NPT discharge, and both the S37 and S38 list 1/4" solids handling. The group includes vertical float, piggyback vertical float, piggyback wide angle float and manual no-switch versions. Because the listed pump specs match across the automatic models, switch type is the main decision for contractors. Matching the switch to the application before ordering avoids a second trip.
Subcategories
Buying Guide
Start with the switch type, because it separates the models. The group includes a vertical float automatic pump, a piggyback vertical float version, a piggyback wide angle float version and a manual pump with no switch. Decide whether the application needs automatic operation before comparing anything else.
Next, match the electrical specs. The automatic models list 115V power and a 10 ft cord, so confirm the outlet and the cord length before ordering. The S38 comes with two cords, so confirm the electrical arrangement for the piggyback models.
When comparing S-30 Series 1/3 HP pumps, look at performance and solids handling. The automatic models show 41 GPM at 5 ft head and a 25 ft shutoff head. The S37 and S38 list 1/4" solids handling with higher intake screening, and the S37 lists a 1-1/2" NPT discharge. Match the discharge size to the existing plumbing. Motor protection details are listed for the S37: an oil filled, thermally protected 1/3 HP motor. Compare them against the installation conditions. Read the full description on each page.
Finally, check the listing for the exact model. The manual pump listing doesn't state electrical or flow specs, so confirm the details on its product page. Specs from one pump don't carry to the entire category.
Frequently Asked Questions
What is the S-30 Series 1/3 HP pump line designed for?
The S-30 Series 1/3 HP pumps from Liberty Pumps were designed to handle the problem areas of sump pumps in new home construction. They're powered by a 1/3 hp motor with larger impeller clearances for better solids and debris handling. Check each listing for the exact model.
What flow does the S-30 Series 1/3 HP automatic pump deliver?
The automatic S-30 Series 1/3 HP models on this page list 41 GPM at 5 ft head and a 25 ft shutoff head. They run on 115V with a 10 ft cord. Specs for the manual model aren't listed in its listing.
What's the discharge size on the S37?
The S37 in the S-30 Series 1/3 HP group lists a 1-1/2" NPT discharge. Discharge size isn't stated for the other models in the sampled listings, so confirm it on each product page before ordering.
What solids size can S-30 Series 1/3 HP pumps handle?
The S37 and S38 are listed for 1/4" solids handling with higher intake screening. The S38 description says the screening helps reduce debris from entering the pump. Confirm solids handling for other models on their product pages.
What switch options are in the S-30 Series 1/3 HP group?
The S-30 Series 1/3 HP group includes a vertical float switch, a piggyback vertical float switch, a piggyback wide angle float switch and a manual pump with no switch. Switch type is the main difference among the sampled models. The S38 comes with two cords.