Saw Blades & Drill Bits are cutting and driving accessories used on sheet metal, metal studs, and thin walled pipe. The Malco listings include a 7-1/4" Steel Cutting Circular Saw Blade with 56 teeth and a 5/8" arbor. The blade is listed at 5800 RPM. The Malco HC1 Hole Cutter adjusts to cut holes from 2" to 12" and installs into the chuck of any corded or cordless drill as small as 1/4". Sheet metal drill bits and insert bits fill out the category for crews who drill and fasten in the same job. Matching each accessory to the material, the drill or saw, and the shank or arbor size keeps cuts clean and limits wasted blades and bits. Choosing correctly at the start of a job reduces trips for replacements and keeps the crew cutting.
Subcategories
Buying Guide
Start with the material, because it decides the tool. Malco's 7-1/4" Steel Cutting Circular Saw Blade is made for unhardened ferrous metal, and it also cuts standing seam metal roofing, metal building panels, metal studs, light angle iron, and thin walled pipe. The 1/8" polished double ender bit and the HC1 hole cutter are both listed for sheet metal.
Next, confirm the tool interface. The 7-1/4" blade has a 5/8" arbor and is described as fitting all popular brands of portable circular saws. The HC1 installs in the chuck of any corded or cordless drill as small as 1/4". The #2 Phillips insert bits fit any 1/4" hex magnetic bit holder.
Then compare size and count. When selecting Saw Blades & Drill Bits, check tooth count, hole range, and pack size against the job. The blade has 56 teeth, the HC1 covers 2" to 12" holes, the polished double ender bit comes in a 12 pack, and the insert bits come in a pack of 2.
Finally, plan for wear. On the HC1, the cutting bit wears only in the dimension of the thickness of material cut, and adjusting the bit slightly exposes a new cutting edge. Double ender bits carry a point at each end for twice the life. Confirm specs on each product page before ordering.
Frequently Asked Questions
What hole sizes does the Malco HC1 hole cutter handle?
The Malco HC1 in Saw Blades & Drill Bits is listed with a size range of 2" to 12". It installs in the chuck of any corded or cordless drill as small as 1/4".
What material can the Malco 7-1/4" steel cutting blade handle?
The Malco 7-1/4" Steel Cutting Circular Saw Blade in Saw Blades & Drill Bits is made for unhardened ferrous metal. Malco also lists standing seam metal roofing, metal building panels, metal studs, light angle iron, and thin walled pipe. The blade has 56 teeth with a TCG tooth design.
Will Malco insert bits fit my bit holder?
The Malco #2 Phillips Insert Bit in Saw Blades & Drill Bits fits any 1/4" hex magnetic bit holder. It is 1" long and comes as a pack of 2.
What are the specs on the Malco 1/8" sheet metal double ender bit?
The Malco 1/8" Polished Sheet Metal Double Ender Drill Bit comes as a 12 pack and is 2" long. Each bit has a punch style point at each end and a 135 degree split point. Malco lists it for use on sheet metal.
How do I get more life out of a Malco hole cutter bit?
In Saw Blades & Drill Bits, the Malco HC1 cutting bit wears only in the dimension of the thickness of material cut. Adjusting the bit slightly exposes a new cutting edge and increases bit life.