Apply to be a TradeMaster!
Filter menu expanded

Filters

6 items
Reset

SORT

Product Availability
–

Show In Stock Only (3)

Brand
–

Zurn (6)

Price Range
–

$5 to $10 (1)
$10 to $15 (1)
$700 to $800 (1)
$1000 to $1500 (1)
$1500 to $2000 (2)

Siphon Jet Water Closet Parts

Help Face
Need a little help?
6 items
Grid
List
Compare
Product Image of EZCARRY Adjustable Horizontal Siphon Jet No-Hub Water Closer Carrier System w/ Right Hand Inlet, Flow to Left
$1,840.99 each
In Stock
Get 41 by Tue, Nov 24
In Stock
Get 41 by Tue, Nov 24
Compare
Product Image of 4" No Hub Adjustable Horizontal Back to Back Siphon Jet Water Closet Carrier
$1,190.25 each
In Stock
Get 2 by Mon, Nov 23
In Stock
Get 2 by Mon, Nov 23
Compare
Product Image of EZCARRY Adjustable Horizontal Siphon Jet No-Hub Water Closer Carrier System w/ Left Hand Inlet, Flow to Right
$1,840.99 each
In Stock
Get 1 by Mon, Nov 23
In Stock
Get 1 by Mon, Nov 23
Compare
Product Image of 4" Hub and Spigot Adjustable Horizontal Single Siphon Jet Water Closet, Right Hand Inlet with Flow to Left
$720.52 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of Anchor Foot for Siphon Jet Water Closet System
Anchor Foot for Siphon Jet Water Closet System
SKU: P1201-ANCHOR-FOOT
Zurn
SKU: P1201-ANCHOR-FOOT
Brand: Zurn
$8.94 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of O-Ring for Siphon Jet Water Closet System
O-Ring for Siphon Jet Water Closet System
SKU: P1201-O-RING
Zurn
SKU: P1201-O-RING
Brand: Zurn
$12.05 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Resources
FAQs, Manuals & Videos
Articles
More About Siphon Jet Water Closet Parts

Siphon Jet Water Closet Parts are the replacement gaskets, foot extensions, faceplates, and couplings that keep a wall-hung or floor-mounted water closet carrier sealed and properly aligned after the original installation ages or settles. Zurn's Z1200-NEOSEAL-GSKT-4, a 4 inch bonded neoprene closet gasket kit, replaces the seal between the fixture and the carrier when a leak develops at that connection. Foot extension assemblies in the Z1200 series adjust carrier height on jobs where the rough-in doesn't match the original foot length, while adjustable faceplates and couplings let an installer fine-tune carrier depth behind a finished wall. For plumbers handling warranty callbacks or older commercial restroom retrofits, having the specific gasket, foot, or faceplate part on hand avoids replacing an entire carrier system just to fix a leak or alignment problem at one connection point.

Subcategories

  • Closet Gaskets: Closet gaskets such as the Zurn Z1200-NEOSEAL-GSKT-4, a 4 inch bonded neoprene kit, seal the connection between a siphon jet water closet and its carrier. Plumbers replace this gasket when a leak develops at the fixture base without disturbing the carrier itself. The bonded neoprene design seats against both the fixture spud and the carrier coupling.
  • Foot Extension Assemblies: Foot extension assemblies from the Z1200 series adjust carrier mounting height when the rough-in doesn't match the original foot length. Installers add these during a retrofit instead of resetting an entire carrier into the slab. Adjusting at the foot saves significant demolition compared to repositioning the whole assembly.
  • Faceplates and Couplings: Adjustable faceplates and couplings, as used on carriers like the Zurn Z1203-ND4, control how far the waste connection sits behind the finished wall. An installer dials in that depth on site rather than ordering a fixed length part ahead of time. These components pair together on most siphon jet carrier systems to fine-tune both depth and alignment.

Buying Guide

Start by identifying the exact carrier manufacturer and series before ordering a replacement part, since Siphon Jet Water Closet Parts from Zurn aren't interchangeable with other carrier brands even when the fixture connection looks similar. A leak at the base of the fixture usually points to a worn closet gasket, such as the Zurn Z1200-NEOSEAL-GSKT-4 bonded neoprene kit, rather than a problem with the carrier itself, so check the gasket first before pulling the whole assembly. When a carrier sits too high or too low for the finished floor, a foot extension assembly adjusts the mounting height without re-setting the entire carrier in the slab, which saves significant demolition on a retrofit. Faceplates and couplings control how far the carrier's waste connection sits behind the finished wall, and an adjustable faceplate lets an installer dial in that depth on site instead of ordering a fixed length part and hoping it matches the rough-in. Confirm whether the installation uses a hub and spigot connection or a no-hub clamp connection, since replacement parts are often sized differently for each connection type. When the original carrier brand isn't obvious from markings, comparing rough-in dimensions against the manufacturer's spec sheet helps confirm the right parts family. Matching brand, series, and connection type up front avoids a second trip for the correct part.

Frequently Asked Questions

What causes a leak at the base of a siphon jet water closet?

A leak at the base usually comes from a worn or compressed closet gasket rather than damage to the carrier itself. Replacing a gasket kit, such as the Zurn Z1200-NEOSEAL-GSKT-4 bonded neoprene kit, often resolves the leak without disturbing the carrier or fixture. Checking the gasket first before removing the whole assembly saves unnecessary labor on the call.

Can a carrier's mounting height be adjusted without resetting it in the floor?

A foot extension assembly adjusts carrier height on site, which matters when the rough-in doesn't match the original foot length. Zurn's Z1200 foot extension assemblies attach to the existing carrier base rather than requiring a new carrier to be set. Making that adjustment at the foot avoids breaking into the slab to reposition the entire carrier.

Are siphon jet water closet parts interchangeable across carrier brands?

Siphon jet water closet parts are built around each manufacturer's specific carrier design, so a Zurn gasket or foot extension doesn't fit a different brand's carrier without confirming compatibility. Identifying the carrier brand and series before ordering avoids receiving a part that looks similar but doesn't seat correctly. Rough-in spec sheets help confirm the right match when brand markings aren't visible.

What is the difference between a hub and spigot connection and a no-hub connection on these carriers?

A hub and spigot connection joins pipe sections with a bell shaped hub, while a no-hub connection uses a clamp style coupling around plain pipe ends. Replacement parts for siphon jet water closet carriers are often sized differently depending on which connection type the original installation used. Confirming connection type before ordering a part avoids a mismatch at the joint.

How does an adjustable faceplate help with a water closet carrier installation?

An adjustable faceplate lets an installer set how far the carrier's waste connection sits behind the finished wall, which varies from job to job depending on wall thickness and framing. Dialing in that depth on site avoids ordering a fixed length part that doesn't match the actual rough-in. Faceplates pair with an adjustable coupling on many carrier systems to fine-tune both depth and alignment.

Didn't find what you're looking for? 
Let us know
.