Stainless Steel Chimney Flashings are stainless steel roof flashings sized by diameter for chimney and vent pipe. The Z-FLEX models on this page are described with diameters running from 3 inches through 22 inches, and the product descriptions list a base measuring 16 inches by 16 inches. Sampled sizes include 3 inch, 4 inch, 5 inch, 5-1/2 inch and 6 inch, and each is classed as a roof flashing vent type. Diameter is the main selection point, since the flashing has to match the pipe at the roof penetration. Because the base dimension is listed alongside the diameter, installers can also check the footprint against the roof area before ordering. Matching both details reduces return trips for the correct size.
Subcategories
Buying Guide
Start with the pipe diameter. The flashing diameter is the primary spec on every record, so measure the chimney or vent pipe and pick the matching size. The sampled listings cover 3 inch, 4 inch, 5 inch, 5-1/2 inch and 6 inch diameters, and the product descriptions say the line runs from 3 inches through 22 inches.
Next, check the base. The product descriptions list a base measuring 16 inches by 16 inches, so confirm that footprint fits the roof area around the penetration. When comparing Stainless Steel Chimney Flashings, note that a 5-1/2 inch size is listed separately from the 5 inch size, so an in-between pipe size does not have to be forced into the nearest whole size.
Then confirm the vent type. Every sampled record lists roof flashing as the vent type, and each is stainless steel by product name. Check the venting product on the job and the manufacturer's installation documentation to verify that the flashing is an appropriate match before ordering. Compatibility is not stated on the product records, so it should be confirmed rather than assumed.
Product descriptions also note that images may not be an actual representation of the item, so rely on the listed diameter and base dimension rather than the photo.
Frequently Asked Questions
What diameters do Stainless Steel Chimney Flashings cover?
The product descriptions say Stainless Steel Chimney Flashings run from 3 inch through 22 inch diameters. Sampled sizes on this page include 3 inch, 4 inch, 5 inch, 5-1/2 inch and 6 inch. Confirm the exact size on the individual product page.
How big is the base on a stainless steel chimney flashing?
The product descriptions for the sampled Z-FLEX Stainless Steel Chimney Flashings list a base measuring 16 inches by 16 inches. Check that footprint against the roof area before ordering.
Is there a 5-1/2 inch stainless steel chimney flashing?
Yes, a 5-1/2 inch Z-FLEX Stainless Steel Chimney Flashing appears in the listing alongside the 5 inch model. Both are classed as roof flashing vent types. Match the flashing to the measured pipe diameter.
What vent type are Stainless Steel Chimney Flashings listed as?
Sampled Stainless Steel Chimney Flashings list roof flashing as the vent type, with diameter as the key spec. Compatibility with a specific venting system is not stated on those records, so verify it with the vent manufacturer before ordering.
Which brand makes the stainless steel chimney flashings listed here?
The sampled Stainless Steel Chimney Flashings are Z-FLEX products. Brand and diameter appear in each product name, so match both against the job requirements before ordering.