Apply to be a TradeMaster!
Filter menu expanded

Filters

3 items
Reset

SORT

Product Availability
–

Show In Stock Only (3)

Review Score
–

(1)
(1)
(1)

Straight-through Supports

Help Face
Need a little help?
3 items
Grid
List
Compare
Product Image of 1/2" Metal Straight-through Support
$10.15 each
In Stock
Get 39 by Mon, Nov 23
In Stock
Get 39 by Mon, Nov 23
Compare
Product Image of 1/2" CTS Straight Floor Sleeve Support
$5.69 each
In Stock
Get 174 by Mon, Nov 23
In Stock
Get 174 by Mon, Nov 23
Compare
Product Image of 1/2" CTS Straight Floor Sleeve Support w/ Short Tube Protector
$4.96 each
In Stock
Get 356 by Mon, Nov 23
In Stock
Get 356 by Mon, Nov 23
Resources
FAQs, Manuals & Videos
Articles
More About Straight-through Supports

Straight-through Supports are rigid mounting brackets that hold PEX tubing in place as it exits a floor or wall in a straight run. Plumbing and hydronic heating installers use these brackets on jobs where 1/2 inch PEX tubing needs a fixed, protected transition point at a floor or wall penetration. A properly placed support keeps the tubing aligned and prevents it from sagging or rubbing against framing, which lowers the risk of long-term wear at that fixed point. Some straight-through brackets, like the Uponor PEX Wall Support Bracket, also accommodate 3/4 inch tubing and use fixed 2 inch on-center spacing so a matching bend support can snap into place beside the straight run. Straight-through Supports belong to a wider lineup of PEX installation accessories, including bend supports and drop ear fittings, that installers rely on to route tubing through wood framing without damaging the pipe wall. Picking the correct size and mounting style before rough-in keeps PEX runs supported and code compliant once walls and floors are closed up.

Subcategories

  • Floor Exit Supports: Floor exit supports hold 1/2 inch PEX tubing in a rigid, straight position as it exits a floor penetration. Plumbers install this type of bracket where tubing rises from a slab or subfloor into open space, such as at a manifold location or fixture supply riser. Keeping the tubing rigid at that exit point reduces movement that could stress the pipe wall over time. That bracket style pairs with the broader PEX installation accessory lineup used to route tubing cleanly through framing.
  • Wall Exit Supports: Wall exit supports hold PEX tubing rigid as it exits a wall rather than a floor. The Uponor PEX Wall Support Bracket covers both 1/2 inch and 3/4 inch Wirsbo AquaPEX tubing in a single bracket design. Plumbers use this style at fixture locations where tubing needs to transition from inside a wall cavity to an exposed supply line. Covering two tubing sizes in one bracket cuts down on the number of unique parts needed on a job with mixed diameters.
  • Fixed-Spacing Mounting Brackets: Fixed-spacing mounting brackets use a set on-center distance between mounting points rather than requiring the installer to measure and mark each location. The Uponor wall support bracket, for example, uses a fixed 2 inch on-center spacing. Consistent spacing speeds up installation on longer runs where multiple brackets are needed to keep tubing supported. Plumbers rely on this style when a job calls for several supports placed in a repeating pattern along a wall or floor plate.
  • Bend-Compatible Supports: Bend-compatible supports are built so a matching bend support can snap into place directly beside the straight-through bracket. Plumbers use this combination on runs that include both a straight exit and a direction change close to the same point, such as where tubing exits a wall and immediately turns to run along a joist bay. Pairing compatible components from the same bracket system keeps the installation consistent and reduces the chance of a loose fit between mismatched parts. Choosing a bend-compatible support in advance saves a second trip if the routing plan changes during rough-in.

Buying Guide

Start by confirming tubing size and exit point before selecting a bracket. Most straight-through brackets are built for 1/2 inch PEX, but some, like Uponor's wall support bracket, also handle 3/4 inch tubing in the same unit. Contractors working a mixed-size job benefit from standardizing on a bracket that covers both diameters, since it cuts down on the number of unique parts carried on a truck. Next, consider whether the tubing exits through a floor or a wall. A support designed to hold PEX rigid at a floor penetration works differently from one mounted flush to a wall stud, so matching the bracket to the penetration type keeps the installation clean and reduces stress on the tubing at that fixed point. Mounting spacing also matters on longer runs. Brackets with fixed on-center spacing, such as the 2 inch spacing found on some Uponor supports, simplify layout because installers do not have to measure and mark each bracket location individually. For jobs that combine straight runs with direction changes, look for Straight-through Supports designed to pair with a matching bend support, since a system built around compatible components installs faster and holds tubing more consistently through transitions. Compatibility with existing PEX crimp or expansion fittings already on the job is worth checking too, since not every bracket brand matches every tubing brand.

Frequently Asked Questions

What size PEX tubing works with Straight-through Supports?

Most Straight-through Supports are built for 1/2 inch PEX tubing, though some brackets, including Uponor's wall support version, also accommodate 3/4 inch tubing in the same design. Checking the tubing diameter against the bracket specification before rough-in avoids a mismatched fit.

Do Straight-through Supports work on both floor and wall penetrations?

Some Straight-through Supports are designed to hold PEX rigid as it exits a floor, while others, like certain Uponor brackets, are built for wall penetrations. Matching the bracket to the specific penetration type keeps the tubing supported and reduces wear at that fixed point.

Can a Straight-through Support pair with a bend support on the same run?

Yes, some Straight-through Supports are designed so a matching bend support snaps into place beside the straight run. Pairing compatible brackets from the same system lets installers combine straight and angled sections without switching to a different bracket line.

What spacing do Straight-through Supports use on longer runs?

Some Straight-through Supports, including the Uponor wall support bracket, use a fixed on-center spacing of 2 inches. Fixed spacing simplifies layout because installers do not need to measure and mark each bracket location individually.

Are Straight-through Supports part of a larger PEX accessory line?

Straight-through Supports are one piece of a broader PEX installation accessory lineup that includes bend supports and drop ear fittings. Installers typically stock several of these components together to handle the different transition points found on a plumbing or hydronic heating job.

Didn't find what you're looking for? 
Let us know
.