Suntouch Radiant Mats (120V) are electric radiant floor heat mats that run on 120 volts and give installers a simple way to add an electric radiant heat system. Listed sizes include a 15 sq ft mat that measures 3' x 5', a 20 sq ft mat that measures 3' x 6.6', and a 30 sq ft mat that measures 2' x 15'. Each uses a braided twin wire design, which the product description says registers nearly zero EMF. The group also includes accessories, such as the Extra SunStat Floor Sensor with a 15' sensor wire and the LoudMouth Meter, which signals loose lead wires or damage to the heating product. Thermostat requirements matter when planning an order, since the 30 sq ft mat is sold without a thermostat. Matching mat size to the floor area and confirming the control and accessories before ordering keeps the project on schedule.
Subcategories
Buying Guide
Start with the floor area to be heated and match it to mat coverage. Coverage is the first spec to settle because it determines which mat fits the floor. Sizes in this group include 15 sq ft at 3' x 5', 20 sq ft at 3' x 6.6', and 30 sq ft at 2' x 15'. Measure the layout and compare the mat's width and length to the space, not only the total square footage.
Next, confirm voltage. When comparing Suntouch Radiant Mats (120V), note that each listing here is a 120 volt mat. The product descriptions state Suntouch mats come in both 120 volt and 240 volt forms, so verify the voltage on the product page against the available circuit.
Then plan the control. The 30 sq ft listing notes that the thermostat is not included and must be purchased separately (SKU 500850-SB). It also says the floor sensor is not sold separately and that the thermostat must be purchased to get the sensor. Verify the control package on the mat being ordered.
Finally, consider accessories. The Extra SunStat Floor Sensor has a 15' wire and is listed for use with 500675-SB and 500670-SB. The LoudMouth Meter signals loose lead wires or damage to the heating product, and its TEST button simulates a damage condition before work begins.
Frequently Asked Questions
What sizes do Suntouch 120V radiant mats come in?
Suntouch Radiant Mats (120V) in this group include 15 sq ft at 3' x 5', 20 sq ft at 3' x 6.6', and 30 sq ft at 2' x 15'. Each is listed at 120 volts. Confirm the size on the product page for the floor being heated.
Does the thermostat come with a Suntouch radiant mat?
The 30 sq ft Suntouch radiant mat listing notes that the thermostat is not included and must be purchased separately (SKU 500850-SB). The same listing also says the floor sensor is not sold separately, so the thermostat purchase is needed to get it. Check the control details on any other Suntouch radiant mat before ordering.
What does the LoudMouth Meter do on a Suntouch mat install?
The LoudMouth Meter is an installation accessory for heating products. A green light indicates it is operating, while a red light and alarm indicate lead wires have come loose or the heating product is damaged. Pressing the TEST button simulates a damage condition before work begins.
How long is the wire on the Suntouch SunStat floor sensor?
The Extra SunStat Floor Sensor has a 15' sensor wire. It is listed for programmable or non-programmable thermostats and as used with 500675-SB and 500670-SB. Confirm the thermostat model against the listed part numbers before ordering.
Do Suntouch radiant mats come in 240 volt as well as 120 volt?
The Suntouch product descriptions say these electric radiant floor heat mats come in 120 volt and 240 volt forms. Suntouch Radiant Mats (120V) in this group are listed at 120 volts. Verify the voltage against the available circuit before ordering.