Tees CxFxC are copper fittings with two sweat, or solder, ends on the run and a female threaded branch outlet in the middle, used to add a threaded takeoff point on a straight run of copper pipe. Branch sizes commonly run smaller than the main run, such as an Elkhart 51204 at 1-1/4 inch by 1/2 inch by 1-1/4 inch, letting a smaller threaded fitting, gauge, or air vent tap into a larger supply or return line. Plumbers and hydronic heating installers reach for this fitting whenever a job calls for threading in a component, such as a boiler drain, pressure gauge, or air vent, without adding a second soldered joint. A baseboard tee variant swaps in a 1/8 inch female branch specifically sized for baseboard heating air vents, and some versions, such as the NIBCO BF5945L, use cast bronze rather than wrought copper for added durability at the threaded connection. Stocking a range of CxFxC sizes alongside standard copper tees keeps a service van ready for both straight branch work and threaded takeoffs on the same trip.
Subcategories
Buying Guide
Start with the size of the main run already in place, since the two sweat ends on a CxFxC tee need to match the copper pipe being tapped into, whether that means a same-size tee or a reducing configuration where one or both run ends step to a different diameter. Branch thread size comes next, and it depends entirely on what needs to thread into the middle outlet, whether that is a pressure gauge, a boiler drain, an air vent, or a valve with female NPT threads on its own connection. Tees CxFxC come in both standard and baseboard configurations, and the baseboard version narrows the branch to 1/8 inch specifically for air vents on hydronic baseboard loops, so a full-size 1/2 inch or 3/4 inch branch calling for a standard gauge or valve needs the non-baseboard version instead. Material matters for potable water work. Lead-free construction, marked directly on lead-free models such as the Elkhart 59252, is required on domestic water branch lines in most jurisdictions, while closed hydronic loops separate from potable water do not carry the same requirement. Volume on the job also factors in. A single branch takeoff needs one tee, but a full baseboard heating retrofit across several rooms can call for a tee at every zone valve or air vent location, so ordering in the quantities a rough-in print calls for avoids a mid-installation supply run.
Frequently Asked Questions
What does CxFxC mean on a copper tee?
CxFxC describes the three connection types on the fitting in order: a sweat, or solder, end on the run, a female threaded branch outlet, and a second sweat end on the opposite side of the run. Soldering handles both ends of the straight run, while the middle branch threads directly onto a gauge, valve, or other threaded component. The letters follow the order the connections appear on the fitting rather than a fixed size order.
What is the difference between a standard CxFxC tee and a baseboard tee?
A standard CxFxC tee carries a full-size female branch, often 1/2 inch or larger, sized for a gauge, valve, or similar threaded component. A baseboard tee, such as the Cello CPCBT-080212, narrows that branch to 1/8 inch specifically to fit a baseboard heating air vent. Both versions solder onto the run the same way, with the branch thread size being the only real difference between them.
Do CxFxC tees come in reducing sizes?
Reducing CxFxC tees, such as the Elkhart 59252 at 3/4 inch by 1/2 inch by 3/4 inch, change diameter on the branch, the run, or both within a single fitting. A reducing configuration lets a smaller threaded component tap into a larger run without adding a separate reducing bushing ahead of a same-size tee. Elkhart also carries this reducing pattern in larger sizes, such as the 51204 at 1-1/4 inch.
Are CxFxC tees available in lead-free construction?
Lead-free CxFxC tees, including the Elkhart 59252 and Elkhart 51204, meet the reduced lead content limits required on potable water systems. Domestic hot and cold water branch lines generally call for lead-free construction under current plumbing code. Closed hydronic heating loops that never carry potable water do not carry the same lead-free requirement, though some contractors standardize on lead-free stock for both applications.
What material options exist for the threaded branch on a CxFxC tee?
Most CxFxC tees use wrought copper construction throughout, including the threaded branch, matching the material of the sweat ends. Some baseboard-specific versions, such as the NIBCO BF5945L, use cast bronze for the threaded branch instead, which can withstand repeated thread engagement from an air vent or valve better than wrought copper. Checking the product description confirms which material a specific model uses before ordering.