Trane Time Delay Relay (American Standard) RLY02807
The Trane RLY02807 is an official OEM time delay relay designed for compatible Trane and American Standard HVAC equipment. This replacement component controls blower timing sequences and ensures proper system operation during heating and cooling cycles.
Key Features & Benefits
Compatibility & Requirements
Verify the exact unit model number and serial number to confirm compatibility. This relay is designed for specific Trane air handler and furnace models, including TWH024B140A1, TWE030C140F1, TWV039E150C1, and TWG036A140B1 series units. Installation should be performed by a qualified HVAC technician to ensure proper electrical connections, system integration, and compliance with local electrical codes. Verify your existing relay part number against the replacement numbers listed before ordering.
Installation & Care
Disconnect all electrical power to the HVAC unit at the breaker panel before beginning work. Remove the access panel to locate the existing time delay relay mounted on the control board or junction box. Disconnect the wire harness by gently pulling the connector straight out from the relay terminals. Remove the old relay by releasing any mounting clips or screws. Install the new RLY02807 relay in the same orientation, securing it with the original fasteners. Reconnect the wire harness by pressing the connector firmly onto the relay terminals until it clicks into place. Restore power and test system operation through a complete heating or cooling cycle to verify proper blower timing. Keep the relay area free from dust and debris during routine filter changes.
What's Included
Frequently Asked Questions
Q: How can I tell if my time delay relay has failed?
A: Common symptoms include the blower fan running continuously without shutting off, the fan failing to start after the heating or cooling cycle begins, or no fan operation at all during system calls for heating or cooling.
Q: What is the purpose of a time delay relay in an HVAC system?
A: The time delay relay controls the blower fan operation by introducing a brief delay after the heating or cooling cycle ends, allowing the system to extract remaining heated or cooled air from the heat exchanger before the fan shuts down.
That appears to be the correct part, it would be best to call with the serial # of the unit to confirm.
Yes, it will.
Yes, it will.
This RLY2807 would work in the TWH024B140A1.