VF & GW Venting Parts (Commercial) are the AO Smith components used to build out and service the vent system on GW and VF models. The page covers exhaust vent covers, horizontal and vertical vent terminals, and vent pipe and vent sections. Sizing matters here. The Vent Pipe for GW/VF Models, part 100050110, is a 6" length of pipe for venting, while the Exhaust Vent Cover for GW Models, part 100110453, is a 5" cover. Each product record names the models it is used with, and some descriptions carry a Genesis Only or Legend Only note. Checking the model, the size, and that note before ordering keeps a retrofit or repair from stalling on a part that does not fit. Venting components affect how the appliance is installed and serviced, so correct part numbers save contractors return trips and keep the job on schedule for the building owner.
Subcategories
Buying Guide
Start with the appliance model. The product records in VF & GW Venting Parts (Commercial) name the models they are used with, such as GW Models or GW/VF Models, so the nameplate on the unit decides which parts apply. Match that model first, then move to size and part type.
Size comes next. The records in this category show 5" and 6" sizes, and one vent section is listed as 4" x 37.5" for 6" GW/VF models. Compare the size on the part against the vent size already on the job before adding anything to an order.
Read the description notes. The exhaust vent cover 100110453 is marked Genesis Only, and the horizontal terminal 100061015 is marked Legend Only. A part carrying one of those notes has a restricted application, so confirm which one applies before ordering.
Choose the terminal style based on how the vent is built. Horizontal terminals and vertical terminals are separate parts with separate part numbers, and the 6" vertical terminal is 100050226. The horizontal terminal 100061015 is a 90 degree elbow listed under Saf-T Vent.
Finally, order pipe and vent sections by listed length or dimensions. The 6" vent pipe, 100050110, is listed as a 6" length. Verify the full parts list for the job with the manufacturer's documentation before placing the order.
Frequently Asked Questions
How do I confirm which VF & GW venting parts fit a unit?
The product records in VF & GW Venting Parts (Commercial) name the models each part is used with, such as GW Models or GW/VF Models. Match the unit model to that listing first. Then check the size and any Genesis Only or Legend Only note in the description.
What sizes are the VF & GW venting parts?
Records in VF & GW Venting Parts (Commercial) show 5" and 6" parts. The exhaust vent cover, 100110453, is 5", while the horizontal terminal 100061015, vertical terminal 100050226, and vent pipe 100050110 are 6". Check each listing for its size before ordering.
Are there horizontal and vertical vent terminals for GW/VF models?
Both appear in VF & GW Venting Parts (Commercial). The horizontal terminal, 100061015, and the vertical terminal, 100050226, are each listed as 6" for GW/VF models. Choose between them based on how the vent is built.
Where do the Genesis Only and Legend Only notes show up on venting parts?
In the product descriptions within VF & GW Venting Parts (Commercial). The exhaust vent cover 100110453 is noted Genesis Only, and the horizontal terminal 100061015 is noted Legend Only. Confirm with the manufacturer's documentation which note applies to the unit on the job.
What vent pipe lengths are listed for GW/VF models?
VF & GW Venting Parts (Commercial) include the 6" Vent Pipe for GW/VF Models, 100050110, described as a 6" length of pipe for venting. A Vent 4" x 37.5" for 6" GW/VF Models, 100110750, is also listed. Compare against the measured run before ordering.