Apply to be a TradeMaster!
Filter menu expanded

Filters

57 items
Reset

SORT

Product Availability
–

Size
–

4" (2)
5" (2)
6" (11)
7" (3)
8" (2)

Price Range
–

$10 to $15 (1)
$15 to $20 (1)
$20 to $25 (1)
$25 to $30 (1)
$30 to $35 (1)
$35 to $40 (1)
$45 to $50 (1)
$50 to $60 (3)
$70 to $80 (1)
$80 to $90 (1)

VF & GW Venting Parts (Commercial)

Help Face
Need a little help?
57 items
Grid
List
Compare
Product Image of Vent Pipe for GW/VF Models, 6", Length 6", 100050110
$434.06 each
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Compare
Product Image of 90 Degree Elbow for 6" GW/VF Models (Saf-T Vent, #9614), 100050289
$261.73 each
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Compare
Product Image of Key, Config Cable, Emc 5000, Vb, Vf, 100064899
$135.14 each
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Compare
Product Image of Flange, Service, 2" X 2-1/2" Npt, Brass, Vf, 100064850
$203.90 each
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Compare
Product Image of Wall Cover Plate for 5" GW Models, 100110442
$53.88 each
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Compare
Product Image of Kit, Blower/pump Harness Assembly, 100109986
$23.61 each
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Compare
Product Image of Kit, Orifice, Nat, 3/8"hex, #35, Brass, 100110314
$310.67 each
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Compare
Product Image of Wall Cover Plate for 6" GW/VF Models, 100110441
$181.05 each
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Compare
Product Image of Kit, Combined Controller, 100112617
Kit, Combined Controller, 100112617
SKU: 100112617
AO Smith
SKU: 100112617
Brand: AO Smith
$826.99 each
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Backorder
Get it by Tue, Dec 22 - Mon, Jan 25
Resources
FAQs, Manuals & Videos
Articles
More About VF & GW Venting Parts (Commercial)

VF & GW Venting Parts (Commercial) are the AO Smith components used to build out and service the vent system on GW and VF models. The page covers exhaust vent covers, horizontal and vertical vent terminals, and vent pipe and vent sections. Sizing matters here. The Vent Pipe for GW/VF Models, part 100050110, is a 6" length of pipe for venting, while the Exhaust Vent Cover for GW Models, part 100110453, is a 5" cover. Each product record names the models it is used with, and some descriptions carry a Genesis Only or Legend Only note. Checking the model, the size, and that note before ordering keeps a retrofit or repair from stalling on a part that does not fit. Venting components affect how the appliance is installed and serviced, so correct part numbers save contractors return trips and keep the job on schedule for the building owner.

Subcategories

  • Exhaust Vent Covers: Exhaust vent covers are vent components used with GW models. Installers and service techs choose them for replacement and retrofit work on the exhaust side of the vent system. The Exhaust Vent Cover for GW Models, 100110453, is a 5" cover with a Genesis Only note in its description. Check that note against the unit before ordering.
  • Horizontal Vent Terminals: Horizontal vent terminals are the terminal fittings for vent runs built in a horizontal position on GW and VF models. Installers select them when a job calls for that vent configuration. The 90 deg Vent Terminal-Horizontal for GW/VF Models, 100061015, is a 6" elbow terminal listed under Saf-T Vent. Its description carries a Legend Only note.
  • Vertical Vent Terminals: Vertical vent terminals are the terminal fittings for vent runs built in a vertical position on GW and VF models. Installers select them when a job calls for that configuration instead of a horizontal terminal. The Vent Terminal-Vertical for GW/VF Models, 100050226, is a 6" terminal. Match the position and size to the existing vent before ordering.
  • Vent Pipe and Vent Sections: Vent pipe and vent sections make up the run of the vent system for GW and VF models. Contractors use them to build or repair that run to the required length. The Vent Pipe for GW/VF Models, 100050110, is a 6" length of 6" pipe, and the Vent 4" x 37.5" for 6" GW/VF Models, 100110750, is a longer section sized for 6" models. Confirm lengths against the layout before ordering.

Buying Guide

Start with the appliance model. The product records in VF & GW Venting Parts (Commercial) name the models they are used with, such as GW Models or GW/VF Models, so the nameplate on the unit decides which parts apply. Match that model first, then move to size and part type.

Size comes next. The records in this category show 5" and 6" sizes, and one vent section is listed as 4" x 37.5" for 6" GW/VF models. Compare the size on the part against the vent size already on the job before adding anything to an order.

Read the description notes. The exhaust vent cover 100110453 is marked Genesis Only, and the horizontal terminal 100061015 is marked Legend Only. A part carrying one of those notes has a restricted application, so confirm which one applies before ordering.

Choose the terminal style based on how the vent is built. Horizontal terminals and vertical terminals are separate parts with separate part numbers, and the 6" vertical terminal is 100050226. The horizontal terminal 100061015 is a 90 degree elbow listed under Saf-T Vent.

Finally, order pipe and vent sections by listed length or dimensions. The 6" vent pipe, 100050110, is listed as a 6" length. Verify the full parts list for the job with the manufacturer's documentation before placing the order.

Frequently Asked Questions

How do I confirm which VF & GW venting parts fit a unit?

The product records in VF & GW Venting Parts (Commercial) name the models each part is used with, such as GW Models or GW/VF Models. Match the unit model to that listing first. Then check the size and any Genesis Only or Legend Only note in the description.

What sizes are the VF & GW venting parts?

Records in VF & GW Venting Parts (Commercial) show 5" and 6" parts. The exhaust vent cover, 100110453, is 5", while the horizontal terminal 100061015, vertical terminal 100050226, and vent pipe 100050110 are 6". Check each listing for its size before ordering.

Are there horizontal and vertical vent terminals for GW/VF models?

Both appear in VF & GW Venting Parts (Commercial). The horizontal terminal, 100061015, and the vertical terminal, 100050226, are each listed as 6" for GW/VF models. Choose between them based on how the vent is built.

Where do the Genesis Only and Legend Only notes show up on venting parts?

In the product descriptions within VF & GW Venting Parts (Commercial). The exhaust vent cover 100110453 is noted Genesis Only, and the horizontal terminal 100061015 is noted Legend Only. Confirm with the manufacturer's documentation which note applies to the unit on the job.

What vent pipe lengths are listed for GW/VF models?

VF & GW Venting Parts (Commercial) include the 6" Vent Pipe for GW/VF Models, 100050110, described as a 6" length of pipe for venting. A Vent 4" x 37.5" for 6" GW/VF Models, 100110750, is also listed. Compare against the measured run before ordering.

Didn't find what you're looking for? 
Let us know
.