Water hammer arrestors are plumbing devices that absorb the pressure surge created when a fast-closing valve, such as a washing machine solenoid or dishwasher valve, suddenly stops flowing water in a pipe. That surge, known as water hammer, produces the loud banging noise many contractors hear in a building's supply lines and can loosen fittings or stress pipe joints over repeated cycles. An arrestor works by containing an air or gas chamber that compresses to cushion the pressure spike instead of letting it travel unchecked through the piping system. Plumbers typically install these devices close to the fixture or appliance causing the hammer, such as directly behind a washing machine box or under a dishwasher, rather than at a central location far from the source. Because the surge happens fast, placement near the fixture generally gives the most effective and immediate cushioning.
Subcategories
Buying Guide
Identifying the source of the hammer noise is the first step before selecting an arrestor. A bang that occurs consistently right after a washing machine or dishwasher cycle points to that appliance's fast-closing valve as the cause, while noise throughout the system after multiple fixtures close might call for a more central solution. Tracing the noise to its source keeps the arrestor placement effective rather than guessing at a fix.
Sizing an arrestor to the fixture and pipe size matters for performance. An arrestor rated for a single fixture connection will not adequately cushion a whole-house supply line experiencing hammer from multiple sources, and installing an undersized unit may only partially resolve the noise. Checking the manufacturer's sizing guidance against the number of fixtures and pipe diameter involved helps match the arrestor to the job.
Water Hammer Arrestor products also vary in connection type, with some threading directly onto a valve or outlet box and others requiring a tee fitting spliced into the supply line. Confirming the connection style fits the existing plumbing configuration before purchasing avoids needing an additional adapter or fitting on the job site.
Frequently Asked Questions
What causes water hammer in a plumbing system?
Water hammer happens when a valve closes quickly enough to stop a moving column of water almost instantly, sending a pressure wave back through the pipe that produces a banging or knocking sound. Fast-closing solenoid valves on washing machines, dishwashers, and ice makers are common culprits. The surge can loosen fittings or stress joints if it happens repeatedly over time without being addressed.
Where should a water hammer arrestor be installed?
Installing an arrestor as close as possible to the fixture or appliance causing the hammer typically gives the most effective cushioning, since the pressure surge is strongest right at the source. A washing machine outlet box or dishwasher supply line are common installation points. Central, whole-house arrestors are used when hammer affects multiple fixtures rather than one clear source.
Do water hammer arrestors need maintenance or replacement over time?
Some arrestor designs can lose their cushioning effectiveness over time if the internal air chamber becomes waterlogged, particularly on older air-chamber-style designs without a sealed diaphragm. A sealed, piston or bellows-style arrestor generally maintains performance longer without needing service. Noticing a return of hammer noise after an arrestor was working fine may indicate it needs replacement.
Can one arrestor fix hammer noise throughout an entire house?
A single arrestor sized for one fixture typically will not resolve hammer occurring at multiple locations throughout a building. Addressing widespread hammer usually requires either individual arrestors at each problem fixture or a larger, whole-house unit installed at a central supply point. Identifying how many fixtures are contributing to the noise helps determine the right approach.
Is a water hammer arrestor required by code?
Some local plumbing codes require hammer arrestors on quick-closing valve connections such as washing machines and dishwashers, while other jurisdictions leave it as a recommended best practice rather than a strict requirement. Checking the applicable local code before finishing a job helps confirm whether an arrestor is mandatory for a specific installation.