Apply to be a TradeMaster!
Filter menu expanded

Filters

2 items
Reset

SORT

Product Availability
–

Show In Stock Only (2)

Review Score
–

(1)

White JG SpeedFit CTS Twist & Lock Swivel Fittings

Help Face
Need a little help?
2 items
Grid
List
Compare
Product Image of 1/2" CTS ID x 1/2" NPS JG Twist & Lock Speedfit Female Swivel Connector
$6.83 each
BOX UP & SAVE 8%
$62.50 box of 10
$6.25 each
In Stock
Get 39 by Tue, Nov 24
In Stock
Get 39 by Tue, Nov 24
Compare
Product Image of 1/2" CTS ID x 1/2" NPS JG Twist & Lock Speedfit Female Swivel Elbow
$6.53 each
BOX UP & SAVE 9%
$59.70 box of 10
$5.97 each
In Stock
Get 18 by Tue, Nov 24
In Stock
Get 18 by Tue, Nov 24
Resources
FAQs, Manuals & Videos
Videos
Other Resources
Articles
More About White JG SpeedFit CTS Twist & Lock Swivel Fittings

White JG SpeedFit CTS Twist & Lock Swivel Fittings are push-to-connect fittings from John Guest that join copper, PEX, or CPVC pipe in any combination to a male threaded connection with no solder, glue, or tools required. The sampled products on this listing, a female swivel connector and a female swivel elbow, are both sized 1/2" CTS by 1/2" NPS. Each is made of engineered plastic with an EPDM O-ring and is listed as lead free. Both carry a rating of 160 psi at 73°F, 100 psi at 180°F, and 80 psi at 200°F. Both also list a 25 year warranty. Contractors use them to land pipe on male threaded connections. Picking the right body style and checking the application limits first matters, since these fittings aren't rated for every system.

Subcategories

  • Female Swivel Connectors: A female swivel connector joins copper, PEX, or CPVC pipe to a male threaded connection with no solder, glue, or tools required. The sampled 1/2" CTS ID x 1/2" NPS model is engineered plastic with an EPDM O-ring. Installers pick it when a straight pipe run meets a male threaded fitting. Product notes say not to use it for gas, fuel oil, or compressed air.
  • Female Swivel Elbows: A female swivel elbow makes the same push-to-connect transition to a male threaded connection and adds a turn in the pipe. The sampled model is sized 1/2" CTS ID x 1/2" NPS and rated 160 psi at 73°F. Installers pick it when the pipe has to turn at the threaded fitting. A TSI20 insert is required for heating applications when connecting to PEX.
  • 1/2" CTS x 1/2" NPS Swivel Fittings: The sampled swivel fittings share a 1/2" CTS by 1/2" NPS size, with the CTS size on the pipe side and the NPS size on the threaded side. Plumbers and installers match both sizes before ordering. Both list a 25 year warranty and a lead free designation. The rating on both includes 100 psi at 180°F.

Buying Guide

Begin with the application. Speedfit fittings can't be used on stainless steel pipe, and the product notes say not to use them for gas, fuel oil, or compressed air. Confirm the system stays within the listed ratings of 160 psi at 73°F, 100 psi at 180°F, and 80 psi at 200°F.

Next, pick the body style. A female swivel connector suits a straight transition to a male threaded fitting, while a female swivel elbow suits a spot where the pipe has to turn at the connection. Both are made of engineered plastic with an EPDM O-ring, so the choice depends on layout. When shopping White JG SpeedFit CTS Twist & Lock Swivel Fittings, match both the 1/2" CTS pipe size and the 1/2" NPS thread size on the fitting.

Then check the pipe material. The fittings join copper, PEX, or CPVC in any combination. On PEX, a TSI20 insert is required for heating applications and recommended for plumbing applications, and it's sold separately, so add it to the order. Last, check compliance. The sampled products list NSF-61, ASTM F 877, and ASSE 1061 among their standards, plus a lead free designation, which helps when a spec sheet or inspector asks for proof. Both sampled models also list a 25 year warranty, a useful detail when comparing options.

Frequently Asked Questions

Can I use Speedfit swivel fittings on stainless steel pipe?

No. Notes on the sampled White JG SpeedFit CTS Twist & Lock Swivel Fittings state that Speedfit fittings cannot be used on stainless steel pipe. They're made to join copper, PEX, or CPVC pipe.

Are the swivel fittings okay for gas or compressed air lines?

No. The product notes on the swivel fittings say not to use them for gas, fuel oil, or compressed air applications. Keep White JG SpeedFit CTS Twist & Lock Swivel Fittings on the applications the listing supports.

Do I need an insert when connecting to PEX?

A TSI20 insert is required for heating applications and recommended for plumbing applications when connecting these swivel fittings to PEX. The insert is sold separately. Confirm it's on the order before heading to the job.

What pressure rating do JG SpeedFit swivel fittings carry?

The sampled products in White JG SpeedFit CTS Twist & Lock Swivel Fittings list 160 psi at 73°F, 100 psi at 180°F, and 80 psi at 200°F. Verify the system's operating conditions against those figures before installing.

What size are the female swivel connector and elbow?

The sampled female swivel connector and female swivel elbow are both 1/2" CTS ID by 1/2" NPS. Each pairs a 1/2" CTS pipe size with a 1/2" NPS threaded connection. Check both sizes on the job before ordering.

Didn't find what you're looking for? 
Let us know
.