Model 17 Metal Handle Repair Kit

Woodford Model 17 Metal Handle Repair Kit

The Woodford Model 17 Metal Handle Repair Kit restores function to Model 17 wall faucets through replacement of the handle assembly and internal sealing components. This residential repair kit includes a metal wheel handle, packing materials, seat rubber, check valves, and associated hardware. The kit addresses common wear points in frost-free sillcocks without requiring full faucet replacement.

Key Features & Benefits

• Complete Handle Assembly: Replaces worn or broken metal wheel handle and mounting screw in one kit
• Dual Check Valve System: Includes both primary and secondary check valves to maintain backflow prevention
• EPDM Packing: Resists temperature extremes and maintains seal integrity through seasonal cycling
• Seat Rubber Replacement: Restores watertight shutoff at the valve seat
• Packing Support Washer: Distributes compression load evenly to extend packing life
• Float Kit Included: Contains RK-17VB vacuum breaker float assembly for anti-siphon function
• Residential Application: Designed for single-family and light-duty residential installations
• Model 17 Compatibility: Engineered specifically for Woodford Model 17 wall faucets
• Product Type: Repair Kit

Compatibility & Requirements

This repair kit fits only Woodford Model 17 wall faucets. The kit does not include the stem assembly; for stem damage, order replacement stems separately. Installation should be performed by a qualified installer to avoid freeze damage from improper reassembly. Local codes may require backflow prevention devices on all outdoor faucets; verify compliance after repair. The kit serves 1/2 inch MPT or sweat inlet connections typical to Model 17 units.

Installation & Care

Shut off water supply and drain the line completely before disassembly. Remove the existing handle screw (part 30002) and metal wheel handle (part 30096). Unthread the packing nut (part 30059) and extract the old EPDM packing (part 30560) and packing support washer (part 30421). Inspect the valve seat for damage and replace the seat rubber (part 30008) and retainer screw (part 30009). Install the new check valves (parts 30418 and 30459) according to the float kit instructions. Reassemble with new packing materials, tightening the packing nut to eliminate leaks without overtightening. Install the new handle and test for smooth operation. Cycle the valve several times to seat all components. Inspect annually for drips or packing leaks.

What's Included

• Handle Screw (part 30002)
• Metal Wheel Handle (part 30096)
• Packing Nut (part 30059)
• EPDM Packing (part 30560)
• Packing Support Washer (part 30421)
• Seat Rubber (part 30008)
• Retainer Screw (part 30009)
• Check Valve (part 30418)
• Check Valve (part 30459)
• Float Kit (RK-17VB)

Frequently Asked Questions

Q: Does the RK-17MH repair kit include the stem washer and packing for a complete rebuild of a Model 17 frost-free sillcock?
A: Yes, the kit contains the seat rubber (which seals against the valve seat at the end of the stem) and the EPDM packing that seals the stem shaft.

Q: Can this repair kit fix a broken outdoor faucet handle on any brand of wall faucet?
A: No, this kit is engineered exclusively for Woodford Model 17 wall faucets and will not fit other brands or Woodford models.