Z-DENS Polypropylene Brackets are Z-FLEX fixation brackets made of fire retardant polypropylene for use in Z-DENS venting. The sampled products on this listing are 3" and 4" Z-DENS Fixation Brackets. The polypropylene is ULC S636 certified for flue temperatures to a maximum of 230°F, and Z-DENS is certified for condensing oil and gas fired heating appliances with flue gas temperatures to a maximum of 248°F. The product text also describes Z-DENS as suitable for negative and positive pressure appliances and lists an appliance white finish. Contractors installing Z-DENS venting on condensing oil and gas fired heating appliances use fixation brackets as part of the run. Matching the bracket size and temperature rating to the appliance matters, since the listed flue temperature limits are part of the certification.
Subcategories
Buying Guide
Start with the size. The sampled products are 3" and 4" Z-DENS Fixation Brackets, so match the bracket to the Z-DENS venting size on the job. Then check the appliance. Z-DENS is certified for condensing oil and gas fired heating appliances, and the polypropylene is ULC S636 certified for flue temperatures to a maximum of 230°F. Confirm the appliance flue gas temperature falls within that limit before specifying the system.
When comparing Z-DENS Polypropylene Brackets, review the pressure type of the appliance. The product text lists suitability for negative and positive pressure appliances, so both appliance types are covered by the listed description. Confirm the finish as well. The text lists an appliance white finish, a point worth checking on exposed runs in finished spaces.
Treat the bracket as part of the Z-DENS system rather than a loose accessory, and review the manufacturer's installation instructions and local code requirements before rough-in. Fire retardant polypropylene is the listed material for both sizes, which matters when a job calls for non-metallic hardware. The sampled 3" and 4" brackets share the same polypropylene material and certification text, so size is the main difference between them. If a project needs a different size or vent category than the sampled brackets, check the product page for that exact model before ordering.
Frequently Asked Questions
What flue temperature are the Z-DENS fixation brackets rated for?
The polypropylene in the sampled Z-DENS Polypropylene Brackets is ULC S636 certified for flue temperatures to a maximum of 230°F. Z-DENS is certified for condensing oil and gas fired heating appliances with flue gas temperatures to a maximum of 248°F. Check the appliance's flue temperature before installing.
What sizes do Z-DENS fixation brackets come in?
The sampled products on the Z-DENS Polypropylene Brackets listing are 3" and 4" Z-DENS Fixation Brackets. Both are polypropylene. Confirm the size on the product page for the exact bracket needed.
Can I use Z-DENS brackets with negative and positive pressure appliances?
Product text for the sampled Z-DENS Polypropylene Brackets describes them as suitable for negative and positive pressure appliances. Z-DENS is certified for condensing oil and gas fired heating appliances. Verify the appliance type against the manufacturer's instructions.
What are Z-DENS fixation brackets made of?
The sampled Z-DENS Polypropylene Brackets are made of fire retardant polypropylene. The material is ULC S636 certified for flue temperatures to a maximum of 230°F. The specifications list polypropylene as the material for both the 3" and 4" sizes.
What color are Z-DENS fixation brackets?
The product text for the sampled Z-DENS Polypropylene Brackets lists an appliance white finish. Confirm the finish on the product page for the exact model before ordering.