Abrasive Belts and Brushes are finishing consumables used to strip, deburr, blend, polish, and clean metal and other surfaces. The category includes 3M products such as the Series 767F ceramic abrasive belt, a 6" wide, 48" OAL belt in 60 grit that is built for wet and dry use. It also covers Scotch-Brite finishing rolls, cloth-backed utility rolls, and a ceramic bristle disc, so the range runs from very coarse cutting products to very fine finishing products. Each product type targets a different stage of surface prep. Grit, backing, and abrasive material all change how fast a product cuts and what finish it leaves behind. Matching the format to the job cuts rework, limits wasted consumables, and keeps surface prep consistent from one part to the next.
Subcategories
Buying Guide
Start with the job: stock removal, blending, or final finishing. The answer sets the grit and the product format before anything else. Coarse grades cut fast and leave a rougher surface. The 3M Series 767F belt in 60 grit and the very coarse ceramic bristle disc sit at that end, while the Scotch-Brite CF-RL roll and the 314D cloth roll in P240 are very fine grades for finishing work.
Next, match the form to the way the work gets done. A belt comes sized by width and overall length, so confirm the dimensions against the equipment before ordering. Roll stock cuts to fit, which suits hand use and oscillating or dual pad rubbing machines. Bristle discs conform to contours and need less pressure than wire brushes, which helps on complex parts.
When comparing Abrasive Belts and Brushes, check the backing, the abrasive material, and the wet or dry rating. Cloth backing on the 314D roll is flexible and durable, and the Series 767F belt is listed for wet and dry use. Aluminum oxide is the material on the listed rolls, while ceramic is the material on the belt and the disc.
Finally, work from coarse to fine grits in sequence, and confirm size, grit, and mounting details in each product description before ordering.
Frequently Asked Questions
What size is the 3M Series 767F belt?
The 3M Series 767F ceramic abrasive belt in this Abrasive Belts and Brushes category is listed as 6" wide and 48" OAL in 60 grit. It is ceramic coated, YF weighted, and listed for wet and dry use. Confirm the size against the equipment before ordering.
Can I use Scotch-Brite rolls by hand, or do they need a machine?
The Scotch-Brite Clean and Finish CF-RL roll in Abrasive Belts and Brushes is suitable for hand use or for oscillating and dual pad rubbing machines. The roll is 12" by 30 ft and cuts to fit. The conformable pad also gets into hard-to-reach areas.
What can I use the 3M 314D utility cloth roll on?
The 314D roll in this Abrasive Belts and Brushes category is an aluminum oxide shop roll for metal, wood, and plastic. The listed roll is 1" wide by 50 yd long in P240 J-weight. Strips tear to size and can wrap around circular pieces or fold into corners.
How do bristle discs compare to wire brushes?
Scotch-Brite bristle discs in Abrasive Belts and Brushes use flexible bristles that need less pressure than wire brushes and conform to contours, even on complex parts. The listed 4-1/2" disc uses a proprietary 3M ceramic abrasive grain and is a very coarse grade. Recommended applications include stripping, deburring, blending, finishing, polishing, and cleaning.
Which very fine roll widths are listed?
Abrasive Belts and Brushes includes very fine aluminum oxide roll stock in purple. The Scotch-Brite CF-RL roll is 12" wide by 30 ft, and a separate non-woven roll is 24" wide by 30 ft. Both list aluminum oxide as the material.