Bell & Gossett Ball Bearing Motors are motors made for use with specific Bell & Gossett pump models, including 2-1/2" LD-3, HD-3, and Series 60 pumps. The models named here are listed for heating applications and run from 1/4 HP to 3/4 HP. Each of them lists 115/230V, 1725 RPM, 60 Hz, and single phase, so the main selection variables are horsepower and the pump model being served. The 1/4 HP motor for 2-1/2" LD-3 pumps and the 1/3 HP motor for HD-3 pumps carry their own listings, as do the Series 60 motors at 1/4 HP, 1/2 HP for the PD-35S, and 3/4 HP for the PD-37S. Picking the right motor matters because each one is tied to a named pump series, and a mismatch can mean a second trip to the job.
Subcategories
Buying Guide
Begin with the pump model. Each motor listing names the pumps it is made for, such as 2-1/2" LD-3, HD-3, or Series 60 pumps, so the pump nameplate is the starting point for any order. Within Series 60, the listings name specific models, including the PD-35S at 1/2 HP and the PD-37S at 3/4 HP.
Next, confirm horsepower. The models named here cover 1/4 HP, 1/3 HP, 1/2 HP, and 3/4 HP. The 1/4 HP motor for LD-3 pumps and the 1/4 HP motor for Series 60 pumps are separate listings, so match on pump model first and horsepower second.
When comparing Bell & Gossett Ball Bearing Motors, check the electrical details against the equipment on site. The models named here list 115/230V, 60 Hz, single phase, and 1725 RPM. Confirm those figures against the existing motor and the pump's requirements before ordering.
Finally, confirm the application. The listings name heating as the application, so verify any other use with the manufacturer before ordering. Keep the old motor's nameplate information handy when comparing options, since it makes a match easy to confirm.
Record the pump series, horsepower, and voltage in the job notes so a future motor replacement goes faster and a reorder for the same pump takes less time.
Frequently Asked Questions
What pumps do Bell & Gossett ball bearing motors fit?
Bell & Gossett Ball Bearing Motors are listed by pump model. Examples include 2-1/2" LD-3, HD-3, and Series 60 pumps, with the PD-35S and PD-37S named for the larger Series 60 sizes. Confirm the exact pump model against the listing before ordering.
What horsepower options are listed for Bell & Gossett ball bearing motors?
The Bell & Gossett Ball Bearing Motors named here include 1/4 HP, 1/3 HP, 1/2 HP, and 3/4 HP sizes. The 1/4 HP size is listed for 2-1/2" LD-3 pumps and for Series 60 pumps. The 1/3 HP size is listed for HD-3 pumps, the 1/2 HP size for the PD-35S, and the 3/4 HP size for the PD-37S.
What voltage and phase do Bell & Gossett ball bearing motors use?
The Bell & Gossett Ball Bearing Motors named here list 115/230V, single phase, 60 Hz, and 1725 RPM. Verify those figures against the pump and the job before ordering.
Are Bell & Gossett ball bearing motors made for heating systems?
The Bell & Gossett Ball Bearing Motors on this page list heating as the application. Each listing names the pump it serves. For any non-heating use, check with the manufacturer first.
Can I use a 1/4 HP Bell & Gossett motor on any pump that needs 1/4 HP?
No. A Bell & Gossett ball bearing motor is listed for named pumps, and the 1/4 HP motor for 2-1/2" LD-3 pumps and the 1/4 HP motor for Series 60 pumps are separate listings. Match the pump model first, then confirm horsepower.