'/%3E%3C/svg%3E)
Hover image to zoom
50 Gallon - 40,000 BTU Defender Safety System TTW1 Power Vent Energy Saver Residential Water Heater (Nat Gas)
 --%3E %3Csvg version='1.1' id='Fill' xmlns='http://www.w3.org/2000/svg' xmlns:xlink='http://www.w3.org/1999/xlink' x='0px' y='0px' viewBox='0 0 100 100' enable-background='new 0 0 100 100' xml:space='preserve'%3E %3Cpath fill='%23F15C02' d='M79.44,0.95H20.56C9.78,0.95,0.95,9.78,0.95,20.56v58.87c0,10.79,8.82,19.61,19.61,19.61h58.87 c10.79,0,19.61-8.83,19.61-19.61V20.56C99.05,9.78,90.22,0.95,79.44,0.95z M65.38,58.24l9.38,29.58L49.69,69.78L24.5,87.82 l9.34-29.6L8.8,39.6l30.73-0.17c0,0,6.98-19.61,10-28.93c0.54,1.36,9.88,29.1,9.88,29.1H91.2L65.38,58.24z'/%3E %3C/svg%3E){kind=small}
 --%3E %3Csvg version='1.1' id='With-RB' xmlns='http://www.w3.org/2000/svg' xmlns:xlink='http://www.w3.org/1999/xlink' x='0px' y='0px' viewBox='0 0 100 100' enable-background='new 0 0 100 100' xml:space='preserve'%3E %3Cpath fill='%23FBC8B4' d='M79.44,0.95H20.56C9.78,0.95,0.95,9.78,0.95,20.56v58.87c0,10.79,8.82,19.61,19.61,19.61h58.87 c10.79,0,19.61-8.83,19.61-19.61V20.56C99.05,9.78,90.22,0.95,79.44,0.95z M65.38,58.24l9.38,29.58L49.69,69.78L24.5,87.82 l9.34-29.6L8.8,39.6l30.73-0.17c0,0,6.98-19.61,10-28.93c0.54,1.36,9.88,29.1,9.88,29.1H91.2L65.38,58.24z'/%3E %3C/svg%3E){kind=small}
Hover image to zoom
' fill='%23F15C02' d='M49 0C21.938 0 0 21.938 0 49s21.938 49 49 49 49-21.938 49-49S76.062 0 49 0m0 82.709a7.54 7.54 0 1 1 0-15.08 7.54 7.54 0 0 1 0 15.08m7.54-28.412a7.541 7.541 0 0 1-15.08 0V22.831a7.54 7.54 0 0 1 15.08 0v31.466z'/%3E%3C/svg%3E)
M-1-TW-50S6FBN has been discontinued
Discontinued September 3, 2015
This product was discontinued by the manufacturer.
MANUALS (8)
'/%3E%3C/svg%3E){kind=small}
Suggested Alternative:
50 Gallon - 40,000 BTU TTW Power Vent Energy Saver Residential Water Heater (Nat Gas)
VIEW ALTERNATIVE
Product Highlights
–
Natural Gas
Power Vent
6 Year Limited Tank/ 6 Year Limited on Component Parts Warranty
50 Gallons
57.375" Height
No
Description
–
To view a list of zip codes where this heater cannot be installed, click here.
The TTW1® model is power vented for positive exhaust. It offers greater installation flexibility with the ability to vent through a wall or roof, with either 2 or 3 PVC, ABS or CPVC pipe.
Features:
The TTW1® model is power vented for positive exhaust. It offers greater installation flexibility with the ability to vent through a wall or roof, with either 2 or 3 PVC, ABS or CPVC pipe.
Features:
- ENERGY STAR® Qualified - These models qualify for the January 1st, 2009 minimum ENERGY STAR® EF requirement, as well as most utility rebate programs.
- Advanced ScreenLok® Technology Flame Arrestor Design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater.
- Flammable Vapor Sensor - Electronic sensor prevents burner operation if flammable vapors are detected. The sensor will also prevent operation if there is ongoing flammable vapor burn inside the combustion chamber.
- Maintenance Free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions.
- Sight Window - Offers a view into the combustion chamber to observe the operation of the pilot and burner.
- Factory installed Hydrojet® Total Performance System - Cold water inlet sediment reducing device helps prevent sediment build up in tank. This increases first hour delivery, while minimizing temperature build up at top of tank.
- Vitraglas® Lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600° F.
- Power Vented Water Heater - Designed for installations where atmospheric units cannot be used. Exhaust gases are vented under positive pressure directly out of the building through the roof or the wall.
- Powerful Blower Motor - Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations.
- Honeywell Self Diagnostic Electronic Gas Control - Intelligent gas control with
spark to pilot ignition system eliminates the constant burning pilot. This results in
savings of pilot gas during stand by periods (120 V.A.C.).
- Enhanced Performance - Proprietary algorithms provide enhanced First Hour Delivery ratings and tighter temperature differentials.
- Advanced Temperature Control System - Microprocessor constantly monitors and controls burner operation to maintain accurate and consistent water temperature levels.
- Intelligent Diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting.
- Pilot On Indication - Flashing green LED provides positive indication that pilot is on.
- Horizontal and Vertical Venting - With 2" or 3" PVC, ABS or CPVC (Maximum equivalent vent length on reverse side).
- 1" Non-CFC Foam Insulation - Covers the sides and top, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity.
- Water Connections - 3/4" NPT factory installed true dielectric fittings.
- Factory installed Heat Traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation.
- Protective Magnesium Rod.
- Pedestal Base.
- T&P Relief Valve - Included.
- Brass Drain Valve - Durable tamper proof design.
Specs
–
| Intended Household: | 3-4 Person |
|---|---|
| Fuel Type: | Natural Gas |
| Warranty: | 6 Year Limited Tank/ 6 Year Limited on Component Parts |
| Capacity (Gallons): | 50 |
| Application: | Plumbing |
| BTU Input: | 40000 |
| Water Connection: | 3/4" |
| 1st Hour Delivery (Gallons): | 86 |
| Gas Connection: | 1/2" |
| Vent Type: | Power Vent |
| Features: | Energy Star Qualified |
| Vent Size: | 2" |
| Height (Inches): | 57.375" |
| Recovery Efficiency: | 80% |
| Diameter (Inches): | 22" |
| Depth (Inches): | 26-3/4" |
| Weight (lbs): | 160 lbs |
| Energy Factor: | 0.63 |
| Energy Star Rated: | No |
Questions?
Speak with a real person who will go out of the way to help!
Call or text 888-757-4774
Monday – Thursday
8am–7:45pm
Friday
9am–7:45pm
Saturday – Sunday
9am–5:45pm
Compare Similar Products
Brand
Intended Household
Fuel Type
Warranty
Capacity (Gallons)
Application
CURRENT ITEM
3-4 Person
Natural Gas
6 Year Limited Tank/ 6 Year Limited on Component Parts
50
Plumbing
You May Also Need
30 Replacement Parts
Air Mixing Inlet, 239-45868-00
SKU: 239-45868-00
Bradford WhiteBlower Gasket, 239-45866-00
SKU: 239-45866-00
Bradford WhiteClip - Sensor (HEYCO), 239-45648-00
SKU: 239-45648-00
Bradford WhiteHeat Trap for dip tube, 415-45073-00
SKU: 415-45073-00
Bradford WhiteHeat Trap Kit, 265-45420-00
SKU: 265-45420-00
Bradford WhiteHeat Trap Insert Kit, 265-45419-00
SKU: 265-45419-00
Bradford WhitePilot Orifice NAT, 234-45869-01
SKU: 234-45869-01
Bradford WhiteLeft Side Inner Door w/ gasket, 239-43968-20
SKU: 239-43968-20
Bradford WhiteOuter Door for FVIR models, 239-43962-00
SKU: 239-43962-00
Bradford WhiteBlower Power Cord, 239-45990-00
SKU: 239-45990-00
Bradford WhiteInner Door Gasket Kit, 239-44078-00
SKU: 239-44078-00
Bradford WhiteHeat Trap for Anode Rod, 415-45167-00
SKU: 415-45167-00
Bradford WhiteOrifice #32, 234-41034-32
SKU: 234-41034-32
Bradford WhiteBaffle - Lanced, 239-45372-00
SKU: 239-45372-00
Bradford WhiteOrifice #38, 234-41034-38
SKU: 234-41034-38
Bradford WhiteOrifice #35, 234-41034-35
SKU: 234-41034-35
Bradford WhiteNeed help finding a replacement part?
Fill out the part request form and someone will get back to you shortly.
PART REQUEST FORM
Product Reviews
4.24 out of 29 reviews
80% would recommend this product
5 star
69%
4 star
14%
3 star
0%
2 star
7%
1 star
10%
Customer Images
Most Liked Positive Review
Awesome Water Heater!!
Replaced my 13 year old Bradford White with this one - seemed to be similar to one I had, well, it must have been! The new one was 1/4" shorter, was a direct replacement, literally! New one has a bigger burner, so faster water heating too!
VS
Most Liked Negative Review
7 year old unit power vented oh my!
Leaking tonight middle of winter here in Colorado! Looked up warranty and it has been out of warranty since June 2012! It is only 8 years old! This was installed in a newly built home finished in 2006 December 31st! Tomorrow will look for a replacement brand! Very disappointed in this unit! New unit will not be a BW!
Showing 1-10 of 29 reviews
Failed 15 days before 6 year Warranty Expired
Had an AOS water heater that lasted 18 years previous and this one did not even make it six. Have water softener and about every four months partially drained the tank to remove any sediment at the bottom. Lucky it failed just before the warranty expired, if this fails again will replace with different brand.
KC
Fort Wayne, IN
10 years ago
Was this review helpful to you?
Seems like a good HW Heater, just installed
So far so good, we installed this unit today and we have been having great hot water at this time, the blower is less noisy than the previous unit.
Frank
Warwick, Maryland
10 years ago
Verified Buyer
Was this review helpful to you?
M-1-TW-50S6FBN
M-1-TW-50S6FBN tank leaked last night, which was installed (8 years ago) in Oct 2006. Need a new replacement. Not recommend this.
Sean Y
Detroit, MI
11 years ago
Was this review helpful to you?
Getting good at replacing water heaters.
We are in the process of replacing this water heater for the second time (3 water heaters total)within 16 years due to tanks leaking. We do have well water, so is this acceptable failure?? Otherwise the heater is easy to install and works well to heat the water.
Not a "want a be" plumber
Eau Claire, WI
12 years ago
Was this review helpful to you?
Bradford White power vent water heater
Bradford White water heaters are nearly impossible to buy outright unless you are a contractor. I have lots of mechanical experience and understand residential codes as they applied to me. So I bought this water heater for my DIY installation. Novices beware, get some experienced help. I needed to move my rigid gas line and vent pipes. I always use new pipes and fittings where needed or taken apart. Make sure natural gas lines are checked for leaks before lighting off.
So far installed 3 months and works like a charm. It lit immediately and heats up fast. It replaced a similar B/W water heater about 11 years old and it worked fine. This was a preventive maintenance replacement. Because of that I shopped for best price and could afford to wait for the shipping online.
Oldchev
Spokane, Wa
12 years ago
Verified Buyer
Was this review helpful to you?
great heater, but did not include stand
I specifically inquired about a stand to install this heater on. The phone rep told me stand was included with order....stand was not in shipment. The delivery driver did not know anything about it. Plumber that installed this heater said I should have the stand to get the heater up a few inches from floor...which would protect heater. It would be nice to resolve this. Thank you
jmatt
Mays Landing NJ
12 years ago
Verified Buyer
Was this review helpful to you?
Its a great Water Heater.
Water Heater is great!
I basically had the same unit previously -lasted 15 years, only a few changes in the unit in the past few years. I like that they moved the power connection.
Remember to purchase feet or need to improvise and have blocking to get the unit off the ground.
The old one came with feet.
Dan EE
Philadelphia PA
12 years ago
Verified Buyer
Was this review helpful to you?
A Model I Like
I purposely sticked with the same model as my original because, "it fit so why quit". It performs beautifully and is dependable. Selfinstallation was a breeze seeing that everything was completely in alignment with the old one, no adjustments at all necessary. A six year tank lasted me eight years. Expecting the same results or better with my new one.
Stick with what you know!
Rosedale, New York
12 years ago
Verified Buyer
Was this review helpful to you?
TTW1 50g 40K BTU
The water heater arrived undamaged and in working order. This was a concern of mine since the return shipping would have been expensive. The build quality looks very good. The manuals are good.
The installation was straight forward and the unit is not overly noisy. There is some fan noise so if not in a dedicated utility space this could be an issue.
The water gets very hot -- so be sure to adjust the temperature setting on the controller.
I gave it 4 stars based on the build quality. I hope it provides years of trouble free service.
Chris
Seattle, WA
12 years ago
Was this review helpful to you?
7 year old unit power vented oh my!
Leaking tonight middle of winter here in Colorado! Looked up warranty and it has been out of warranty since June 2012! It is only 8 years old! This was installed in a newly built home finished in 2006 December 31st! Tomorrow will look for a replacement brand! Very disappointed in this unit! New unit will not be a BW!
Papa
Colorado and snowing
12 years ago
Was this review helpful to you?
Product Q&A
16 Questions16 Questions
Q: Should a hose be connected to the vent hole in the exhaust rubber flange?
Asked by Connie 10 years ago
Add your answer
Verified Reply- SupplyHouse StaffPlease refer to the venting installation instructions and local code for further assistance: http://s3.supplyhouse.com/product_files/M-1-TW-50S6FBN-Venting.pdf
Was this review helpful to you?
Q: Does the pilot light on a LP unit have to be re-lit after a power failure?
Asked by Dave 11 years ago
Add your answer
Verified Reply- SupplyHouse StaffNo, the pilot is electronically started with each demand for heat so no re-lighting required.
Was this review helpful to you?
Q: Can the M-1-TW-50S6FSX (LP) unit be converted to use Natural Gas? Someone answered that it cannot be converted from NG to LP, which was not for the question asked.
Asked by Anita 11 years ago
Add your answer
Verified Reply- Supplyhouse StaffNo these units can not be converted.
Was this review helpful to you?
Q: Will this unit work if we lose electrical power? We sometimes lose power for several days during ice storms and I want to make sure we keep having hot water.
Asked by Colin 12 years ago
Add your answer
-
No it will not because without power it cannot vent the poison exhaust gases. Without power for the "powered vent", the gas heater shuts down. JRR Sent from my iPhone
Was this review helpful to you?
Q: how many feet can you vent this unit?
Asked by Bob 12 years ago
Add your answer
Verified Reply- SupplyHouse StaffThe maximum venting distance for this unit depends on the number of elbows in the vent run. For specific length limits please see the vent chart on pg 11 here: http://s3.supplyhouse.com/manuals/1270752206645/28915_PROD_FILE.pdf
Was this review helpful to you?
-
Bob, there is no short answer or single number to answer your question. You must carefully follow the venting instructions in the following guide: http://s3.supplyhouse.com/manuals/***.****45/28915_PROD_FILE.pdf The distance is greatly dependent on whether you use 2" or 3" vent piping and how many 45 deg and 90 deg elbows. You must also study the limitations on where you can put the exhaust vent on the outside of your house. For example in distance from windows, other air intakes, etc. Hope this helps. JRR
Was this review helpful to you?
Q: Can you convert this unit to natural gas from LP?
Asked by RLJ 12 years ago
Add your answer
Verified Reply- SupplyHouse StaffNo this unit cannot be converted from NG to LP. There is an LP version of this unit available M-1-TW-50S6FSX. available here: http://www.supplyhouse.com/Bradford-White-M-1-TW-50S6FSX-50-Gallon-38-000-BTU-Defender-Safety-System-TTW1-Power-Vent-Energy-Saver-Residential-Water-Heater-LP-Gas
Was this review helpful to you?
Q: The manual states that the unit is to be adhered to the floor or mounted on a leg kit that is optional, am I reading that correctly? I read a review about a check valve included in the box but no instructions on its use, is one needed? thank you
Asked by ronald 13 years ago
Add your answer
-
Hello, I did not adhere the water heater to the floor. I placed it on floor tile that I had left over. The heater came with a pressure relief valve. I'm not familiar with a check valve needed.
Was this review helpful to you?
-
I mounted the Heater on a leg platform and braced the entire unit to two adjacent walls. The only valve I remember is the pressure relief valve. I connected that to a 3/4 inch rigid copper line that was routed to the exterior of the building. I hope this helps.
Was this review helpful to you?
-
Doesn't sound like those statements are part of this water heater installation. I might add that installing this water heater involves complex knowledge and installation abilities. Judging from your questions, I recommend you ONLY get a licensed certified installer to do the job. Could go terribly wrong on many fronts. Good luck.
Was this review helpful to you?
Q: Where can I find M-4 -5036FCX? M-4 is on the local rebate model number and offers 2" insulation vs 1" for the M-1. Thanks!
Asked by newbie 14 years ago
Add your answer
Verified Reply- PexSupply StaffThe link below should be what you're looking for (i.e. M-4-5036F, propane version), but please check with your utility company to confirm that it also meets their rebate requirements. http://www.pexsupply.com/Bradford-White-M-4-5036FSX-50-Gallon-36000-BTU-Defender-Safety-System-Energy-Star-High-Efficiency-Residential-Water-Heater-LP-Gas
Was this review helpful to you?
Q: what is the energy effecienty percentage of this heater?
Asked by jw 14 years ago
Add your answer
Verified Reply- PexSupply StaffThis unit has a .63 Energy Factor.
Was this review helpful to you?
- Another PexSupply Customer
Aprox. 67%
Was this review helpful to you?
Q: efficiency rating 40, 50 75 gal. power vent water heaters
Asked by 14 years ago
Add your answer
Verified Reply- PexSupply StaffThe 40 and 50 gallon units have a .63 Energy Factor.
Was this review helpful to you?