Direct Drive Fan & Blower Motors are motors built for continuous air over applications, such as high voltage fan and blower systems. The Genteq Motors models listed include a 3 Speed 1/5 HP, 115V motor and a 5-1/2 inch 1 Speed 1/6 HP, 208 to 230 volt motor, both permanent split capacitor designs. Each is designed for a 370 volt capacitor, which is not furnished, and each lists automatic thermal overload protection. Contractors replace these motors in blower assemblies when a motor fails or trips its thermal protection. Matching voltage, horsepower, and capacitor requirements to the original keeps a motor swap from turning into a callback. Amperage and speed count differ between the two models listed, so the details on each product page matter before ordering. Getting the specification right protects the motor, the blower, and the customer's comfort.
Subcategories
Buying Guide
Start with the original motor's nameplate. Voltage, horsepower, RPM, and rotation need to match the application before anything else is compared. The listed Genteq Motors models show how much these vary, from a 115V, 1/5 HP motor to a 208 to 230 volt, 1/6 HP motor.
Next, check the speed configuration. The 1/5 HP model is a 3 speed motor, and the 1/6 HP model is a 1 speed motor. Rotation is listed as reversible on both, which gives flexibility when the original rotation differs.
When shopping Direct Drive Fan & Blower Motors, confirm the duty rating. Both listed models are designed for continuous air over applications and include automatic thermal overload protection, but a motor used for other duties may not perform as intended. Also confirm the capacitor, since each model is designed for a 370 volt capacitor that is not furnished. Order the capacitor with the motor when the old one is questionable.
Finally, check amperage and mounting. The listed amperage is 3.51 on the 115V model and 0.9 on the 208 to 230 volt model, and the 5-1/2 inch model uses resilient rings. Verify these details against the original motor and the product page before ordering, and contact the SupplyHouse team if the match is unclear.
Frequently Asked Questions
What are direct drive fan and blower motors designed for?
Direct Drive Fan & Blower Motors on this listing are described as designed for continuous air over applications, such as high voltage fan and blower systems. Both Genteq Motors models shown are permanent split capacitor motors.
Do these motors come with a capacitor?
No. The Genteq Motors direct drive fan and blower motors shown are designed for a 370 volt capacitor that is not furnished. Plan to supply the capacitor separately when replacing a direct drive fan and blower motor.
Can the rotation be reversed on these motors?
Both Genteq Motors direct drive fan and blower motors shown list reversible rotation. Confirm the required rotation on the original motor before installing the replacement.
What's the difference between the 1/5 HP and 1/6 HP models?
The 1/5 HP model is a 3 speed motor at 115V with 3.51 amperage, while the 1/6 HP model is a 1 speed motor listed for 208 to 230 volts with 0.9 amperage and 1075 RPM. Both are permanent split capacitor designs. Check the specs against the original direct drive fan and blower motor before ordering.
Do these motors have thermal protection?
Yes. Both Genteq Motors direct drive fan and blower motors shown list automatic thermal overload protection. Thermal protection does not replace a diagnosis, so find out why a motor tripped before replacing it.