Fab 5-T Fabriflex Low Pressure Ducting (Insulated) is a Z-FLEX duct line sold with insulation, sized by diameter and rated by R-value. Listings in this category include a 5 inch by 25 foot duct rated R6 and a 10 inch by 25 foot duct rated R4.2, so diameter and insulation level can change from one item to the next. Contractors specify insulated duct when a run passes through a space where conditioned air can gain or lose heat before it reaches the register. Matching diameter and R-value to the job keeps the installed system in line with the design on paper. Each listing carries its own specifications, so compare the diameter and R-value on every product page before placing an order. Getting those two numbers right at the start saves a return trip and keeps the crew on schedule.
Subcategories
Buying Guide
Start with the diameter called for in the system design. Diameter drives airflow capacity for each run, so it gets settled before any other choice. The listings in this category include 5 inch and 10 inch sizes, and both are listed in 25 foot lengths.
Next, match the R-value to the space the duct will cross. The 5 inch Z-FLEX product is rated R6, while the 10 inch product is rated R4.2. Because ratings differ between products, never assume one R-value carries across the whole category. Check the specification on each product page and compare it to local code and project requirements.
Then work out quantity. Measure the run, account for fittings and connections, and divide by the 25 foot length to see how many pieces the job needs. Ordering a little extra for cuts is routine practice on most installs.
When comparing options within Fab 5-T Fabriflex Low Pressure Ducting (Insulated), keep a short list of the diameter, R-value, and length for every run on the job. A list like that makes it easy to confirm each line item before checkout and helps the crew pull the right material for each space. Questions about a specific application or code requirement belong with the engineer of record or the local authority having jurisdiction.
Frequently Asked Questions
What diameters are listed for Fab 5-T Fabriflex Low Pressure Ducting (Insulated)?
Fab 5-T Fabriflex Low Pressure Ducting (Insulated) listings include 5 inch and 10 inch products, each in a 25 foot length. Check the category page for the full list of sizes.
What R-value does insulated Fab 5-T Fabriflex duct have?
Insulated Fab 5-T Fabriflex duct varies by product. The 5 inch Z-FLEX duct is rated R6 and the 10 inch is rated R4.2. Check each product page for the rating before ordering.
Who makes Fab 5-T Fabriflex Low Pressure Ducting (Insulated)?
Z-FLEX is the brand listed on the Fab 5-T Fabriflex insulated duct products in this category. Each product page shows the brand along with the diameter and R-value.
How long is each piece of insulated Fab 5-T Fabriflex duct?
The 5 inch and 10 inch insulated Fab 5-T Fabriflex ducts listed here are each 25 feet long. Divide the run length by 25 to estimate the number of pieces, then add an allowance for cuts and fittings.
How do I choose between the R6 and R4.2 insulated duct?
Insulated Fab 5-T Fabriflex duct is listed by diameter and R-value, and in this category the 5 inch product is R6 while the 10 inch product is R4.2. Pick the diameter the design requires first, then confirm the R-value meets project and code requirements for that space. Diameter and R-value are separate specs, so check both on the product page.