1/2" Copper Stub Bracket (20" Length)

GREAT PRODUCT

The stub brackets worked great. I would use them again.

very easy to install

Worked like a champ. Held stub outs level and secure while I soldered them.

This works really well when there is a 16o.c. stud and the water lines are in the same bay. Otherwise the protrusions will make things difficult.

They have the best price for the bracket. It was only 1/3 the price of the home center store

These straps/brackets make soldering stub outs a whole lot easier. Instead of just a hole that will allow the copper pipe to wiggle, the holes are punched through in such a way that forms a "shoulder" that holds the pipe straight and firm. That way you can fit all your copper and fittings at one time and solder all at once. When I do a kitchen remodel, I have two hot and two cold valves under the sink. One each for faucet hot and cold, one for dishwasher and one for filtered water or ice maker. I cut, sand, flux and fit all the parts and these brackets make is a breeze as they hold everything straight and tight. Well worth buying these. Makes my life easier.

Nicely made, but quite flexible. Light metal heats quickly, but not suitable where you need more stiffness.

Stiffer & more versatile than the lightweight version. Slower to heat when soldering, but worth the wait. Can be cut at any point along its length: versatile.