Apply to be a TradeMaster!
Filter menu expanded

Filters

52 items
Reset

SORT

Product Availability
–

Show In Stock Only (26)

BTU
–

33000 (2)
40000 (1)

Review Score
–

(4)
(2)
(2)

Price Range
–

$600 to $700 (2)
$700 to $800 (4)
$800 to $900 (2)
$900 to $1000 (2)
$1000 to $1500 (9)
$1500 to $2000 (11)
$2000 to $2500 (6)
$2500 to $3000 (8)
$3000 to $3500 (1)
$3500 to $4000 (2)

Modine Hydronic Unit Heaters

Help Face
Need a little help?
52 items
Grid
List
Compare
Product Image of HC290SC01SA Horizontal Steam/Hot Water Unit Heater- 290,000 BTU
$2,766.89 each
Backorder
Get it by Wed, Dec 23 - Thu, Jan 28
Backorder
Get it by Wed, Dec 23 - Thu, Jan 28
Compare
Product Image of 195,000 BTU HCH Lodronic Low-Temperature Hydronic Heater
195,000 BTU HCH Lodronic Low-Temperature Hydronic Heater
SKU: HCH195SC01SA
Modine
SKU: HCH195SC01SA
Brand: Modine
$4,923.55 each
Backorder
Get it by Wed, Dec 23 - Thu, Jan 28
Backorder
Get it by Wed, Dec 23 - Thu, Jan 28
Compare
Product Image of HSB-47 Horizontal Steam/Hot Water Unit Heater- 47,000 BTU
HSB-47 Horizontal Steam/Hot Water Unit Heater- 47,000 BTU
SKU: HSB47SB01SA
Modine
SKU: HSB47SB01SA
Brand: Modine
(5)
$1,245.01 each
In Stock
Get 18 by Tue, Nov 24
In Stock
Get 18 by Tue, Nov 24
Compare
Product Image of Vertical Hydronic Hot Water/Steam Unit Heater - 20,000 BTU
Vertical Hydronic Hot Water/Steam Unit Heater - 20,000 BTU
SKU: V193SB05SA
Modine
SKU: V193SB05SA
Brand: Modine
$2,437.02 each
In Stock
Get 6 by Tue, Nov 24 - Fri, Nov 27
In Stock
Get 6 by Tue, Nov 24 - Fri, Nov 27
Resources
FAQs, Manuals & Videos
Articles
More About Modine Hydronic Unit Heaters

Modine Hydronic Unit Heaters are suspended, hot-water-fed space heaters designed to warm garages, warehouses, and other large or drafty commercial spaces without ductwork. Each unit draws hot water or glycol from a boiler loop through a finned coil, then uses a fan to push heated air across the room, which makes it a practical fit for buildings that already run hydronic heat for another purpose. Selecting the right model comes down to matching heating capacity and airflow to the room's size and ceiling height, since an undersized unit will run constantly without keeping up on cold days. Mounting height and throw distance also affect comfort, because a unit hung too high can leave the occupied zone cooler than the thermostat reading suggests. Replacement motors, coils, and fan blades for these heaters let a facility keep an existing unit running for years past its original installation instead of replacing the whole heater.

Subcategories

  • Unit Heater Motors: Motors in this group drive the fan that pushes air across the hydronic coil and out into the room. Replacement motors are matched by horsepower, voltage, and mounting style to the original unit rather than by physical size alone. A motor that runs slow or overheats is one of the more common reasons a unit heater stops delivering enough warm air. Sealed and open designs are both used across the Modine lineup depending on the environment the heater serves.
  • Hydronic Coils: Coils carry the hot water or glycol from the boiler loop and transfer that heat into the airstream moving through the unit. A coil with reduced output usually points to mineral scale buildup, trapped air, or a leak somewhere in the fin pack. Replacement coils are sized to match the original row count and fin spacing so airflow and heat output stay consistent after the swap. Flushing the loop before installing a new coil helps prevent the same scale problem from recurring.
  • Fan Blades & Guards: Fan blades and their protective guards keep air moving safely through the heater and away from moving parts in an occupied space. A bent or unbalanced blade puts uneven strain on the motor bearing and can shorten its life well before the coil itself wears out. Guards are typically sized to the cabinet dimensions of a specific Modine model rather than sold as a universal fit. Replacing a damaged blade at the same time as a motor swap avoids a second service call later in the season.
  • Thermostats & Controls: Controls in this group range from simple line-voltage thermostats to fan-cycling switches that keep the blower from running before the coil reaches temperature. A heater that blows cold air on startup is often missing or has a failed fan-cycling control rather than a problem with the coil or boiler. Matching voltage and switching type to the original control avoids wiring changes during a straightforward swap. Pairing a working control with a clean coil keeps comfort consistent across a heating season.
  • Buying Guide

    Sizing comes first when working through a Modine Hydronic Unit Heaters order, since heating capacity needs to match both the square footage and the ceiling height of the space being conditioned. A garage or warehouse with high ceilings loses more heat to stratification, so mounting height and fan throw distance matter as much as the rated output printed on the nameplate.

    Water temperature supplied by the boiler loop also affects real-world output, because a unit rated at a specific capacity assumes a particular entering water temperature. A loop running cooler than that design point will deliver less heat than the nameplate suggests, which matters when a heater seems undersized after installation even though the model number matches the original specification.

    For repairs rather than new installations, pulling the model and serial number off the unit's nameplate before ordering parts avoids a mismatched motor, coil, or control. Coils in particular vary by row count and fin spacing even within a single product line, so a part that looks similar on a parts diagram may not fit the specific unit in the field. Keeping a small stock of common fan-cycling controls and universal motors alongside model-specific coils covers most Modine Hydronic Unit Heaters service calls without a special order.

    Frequently Asked Questions

    What size Modine unit heater does a garage need?

    Sizing depends on square footage, ceiling height, and how well insulated the space is, not on floor area alone. A qualified contractor calculates heat loss for the space and matches it to a unit's rated output at the boiler loop's actual water temperature.

    Why does a Modine hydronic heater blow cold air when it first turns on?

    Cold air on startup is usually caused by a missing or failed fan-cycling control, which is supposed to delay the blower until the coil reaches temperature. Checking that control before assuming a coil or boiler problem saves time on the service call.

    Can a universal fan motor replace a Modine-specific motor?

    A universal motor can work in many cases as long as horsepower, voltage, rotation, and mounting style match the original. Pairing it with the correct mounting hardware from this category keeps the installation straightforward.

    How often should a hydronic coil be flushed or cleaned?

    Flushing frequency depends on water quality and system age, but a noticeable drop in heat output is a common sign that scale or trapped air has built up in the coil. Flushing the loop before replacing a coil helps prevent the new one from scaling as quickly.

    What causes uneven heating in a space served by a Modine unit heater?

    Uneven heating often comes down to mounting height and fan throw not matching the room's layout, especially in spaces with high ceilings where warm air stratifies. Adjusting louvers or confirming the unit was sized and positioned correctly resolves most complaints of cold spots.

Didn't find what you're looking for? 
Let us know
.