Multipress MLC Brass Copper Pipe Adapters are press-to-sweat transition fittings that connect PEX-AL-PEX tubing to copper pipe. The catalog records for this listing show Mr. PEX adapters in 1/2", 3/4", and 1" sizes, each with a matching PEX size and sweat size. The bodies are made from DZR brass and use double O-rings and a stainless steel press sleeve. They are intended for ASTM F1281-2005 PEX-AL-PEX tubing in radiant applications, and the sampled products are not for potable water. The product notes call for a reamer on any PEX-AL-PEX fittings, so the right tool needs to be on the truck before the job starts. Choosing the correct adapter matters because a transition fitting is where two piping materials meet, and an accurately installed press fitting offers a fast, reliable, and permanent connection.
Subcategories
Buying Guide
Start with the tubing. The sampled adapters list PEX-AL-PEX as the tubing compatibility, so confirm the loop is PEX-AL-PEX before choosing a fitting. Next, match the size. The catalog records show 1/2", 3/4", and 1" adapters, and each pairs a PEX size with an equal sweat size. Check the PEX size against the tubing and the sweat size against the copper pipe, since each end has to match its pipe.
Confirm the application. When shopping Multipress MLC Brass Copper Pipe Adapters, note that the product descriptions for the sampled adapters call for radiant applications and state they are not for potable water. Verify the intended service against the product listing before ordering for any other use.
Look at the construction. The sampled adapters use a DZR brass body, double O-rings, and a stainless steel press sleeve, and the descriptions reference ASTM F1281-2005 PEX-AL-PEX tubing.
Plan the tooling. The product notes call for a reamer on any PEX-AL-PEX fitting, so add one to the job list. The catalog records do not state which press tool or jaws are required, so verify that detail with the manufacturer before committing to a full run of fittings.
Finally, buy by the job. Count each PEX-AL-PEX to copper transition, sort the list by size, and match every fitting to the pipe it joins before placing the order.
Frequently Asked Questions
What are Multipress MLC Brass Copper Pipe Adapters used for?
Multipress MLC Brass Copper Pipe Adapters transition PEX-AL-PEX tubing to copper pipe. The sampled products are Mr. PEX press by sweat adapters for radiant applications. Each one pairs a PEX size with an equal sweat size.
What sizes do these adapters come in?
The catalog records for Multipress MLC Brass Copper Pipe Adapters show 1/2", 3/4", and 1" sizes. Each size pairs the same PEX size with the same sweat size. The records are a sample, so check the listing for any other sizes.
Can I run these on potable water lines?
The sampled Multipress MLC Brass Copper Pipe Adapters are described as not for potable water and are meant for radiant applications. Verify the service rating on the specific listing before using any adapter on a domestic line.
Do I need to ream the PEX-AL-PEX tubing first?
The product notes for the sampled adapters say a reamer must be used on any PEX-AL-PEX fittings. Plan on reaming as part of the install whenever Multipress MLC Brass Copper Pipe Adapters go on PEX-AL-PEX tubing.
What are Multipress MLC Brass Copper Pipe Adapters made of?
The sampled Multipress MLC Brass Copper Pipe Adapters have a DZR brass body, double O-rings, and a stainless steel press sleeve. The descriptions pair them with ASTM F1281-2005 PEX-AL-PEX tubing.