PEX Crimp Male Threaded Adapters are fittings that connect PEX tubing to a female threaded connection. The Bluefin 1/2" PEX Crimp x 1/2" NPT adapter, for example, is made of dezincification resistant ECO Brass in alloy C69300 and is listed as lead free. Brands on the page include Bluefin and Everflow, and sizes include 1/2", 3/4", 3/4" x 1" and 1-1/4". Several of these adapters can be used with either the stainless steel clamping system or the copper crimp ring system, so installers can match the adapter to the crimp method already in use. Alloy matters in this category. Some adapters are DZR brass, while the Bluefin 1-1/4" model carries a note against use where brass is exposed to hard water. Checking the alloy, thread size and PEX size before ordering keeps the threaded transition reliable and limits rework.
Subcategories
Buying Guide
Start with the alloy. The Bluefin DZR models listed in alloy C69300 are made of dezincification resistant ECO Brass. The Bluefin 1-1/4" model in alloy C46500 is susceptible to dezincification, does not hold a high DZR rating, and should not be used where brass parts may be exposed to hard water with high sulfur or mineral content. Read the product description for every part before it goes on the order.
Next, match the sizes. When shopping PEX Crimp Male Threaded Adapters, treat the PEX size and the NPT thread size as two separate numbers, because some adapters pair different sizes. The Bluefin 3/4" PEX x 1" NPT model is one example, while the 1/2" PEX Crimp x 1/2" NPT and 1-1/4" PEX x 1-1/4" NPT models match tubing and thread sizes.
Then confirm the crimp method. Several listings say the fitting may be used with the stainless steel clamping system or the copper crimp ring system, so pick the adapter that fits the method the crew already runs. The Bluefin 1-1/4" model is for use with PEX tubing only.
Last, check standards. The Bluefin 1-1/4" model lists CSA B137.5, NSF 14, NSF 372 and NSF 61. The Everflow 1-1/4" model is described as meeting all applicable ANSI standards, with bronze material to ASTM B62. Compare these details to job requirements before ordering.
Frequently Asked Questions
What do PEX crimp male threaded adapters connect?
PEX crimp male threaded adapters connect PEX tubing to a female thread. The Bluefin and Everflow adapters on the page are described that way, and the Bluefin 1/2" model is listed as PEX Crimp x MNPT. Confirm the thread size and PEX size on the part before ordering.
Can these adapters be used with copper crimp rings or stainless clamps?
Several PEX crimp male threaded adapters on the page state they may be used with the stainless steel clamping system or the copper crimp ring system. Examples include the Bluefin 1/2" PEX Crimp x 1/2" NPT adapter and the Everflow 3/4" PEX x 3/4" NPT adapter. Check the individual listing for the exact part.
Are PEX crimp male threaded adapters lead free?
The Bluefin and Everflow PEX crimp male threaded adapters reviewed here are each listed as lead free, in sizes from 1/2" to 1-1/4". Confirm the lead free spec on the exact part number before ordering, since models vary.
What's the difference between DZR and standard brass PEX male adapters?
Among PEX crimp male threaded adapters, DZR models like the Bluefin 1/2" PEX Crimp x 1/2" NPT use dezincification resistant ECO Brass in alloy C69300. The Bluefin 1-1/4" model uses alloy C46500, is susceptible to dezincification and does not hold a high DZR rating. It should not be used where brass parts may be exposed to hard water with high sulfur or mineral content.
Which adapter takes 3/4" PEX to a 1" female thread?
The Bluefin 3/4" PEX x 1" NPT DZR brass male adapter is listed for that size pairing. Like other PEX crimp male threaded adapters, it connects PEX to a female thread, and it uses alloy C69300. Verify the fit against the female fitting before ordering.