PEX Press Stop Valves are shutoff valves that connect directly to PEX tubing using a press-fit connection, giving plumbers a code-compliant way to isolate water supply at a fixture without soldering or gluing. Viega's PEX Press stop valves are rated for a maximum working pressure of 200 psi and a temperature range of 36°F to 250°F, and they're manufactured lead-free for potable water use. Installers use a press tool to compress a stainless steel sleeve over the PEX tubing and valve connection, creating a permanent, leak-tight joint in seconds rather than minutes. Angle and straight configurations cover the range of rough-in orientations found under sinks, behind toilets, and at other point-of-use fixture locations. Because the valve body accepts a compression outlet, typically 3/8 inch OD, it connects to braided supply lines, copper risers, or poly risers without an additional adapter. For remodel and new-construction plumbing where PEX is already the supply material, press stop valves eliminate a separate transition fitting and speed fixture rough-in.
Subcategories
Buying Guide
Choosing a PEX Press stop valve starts with matching rough-in geometry to valve style. Angle stop valves turn the supply line 90 degrees between the wall or floor connection and the fixture riser, which fits most toilet installations. Straight stop valves keep the same line direction, matching typical under-sink rough-in where the riser lines up with the supply line. PEX Press Stop Valves connect to 1/2-inch PEX tubing on the inlet side using a press fitting formed with a press tool and stainless steel sleeve, so confirm the press system already in use on the job matches the valve manufacturer's tooling requirement before starting work. On the outlet side, a 3/8-inch OD compression connection accepts braided supply lines, copper risers, or poly risers, giving flexibility in matching whatever riser is already specified for the fixture. Pressure and temperature ratings matter for commercial or multi-family work: Viega's PEX Press stop valves carry a 200 psi maximum working pressure and a temperature range of 36°F to 250°F, covering standard domestic hot and cold water service. Confirm the valve is lead-free and rated for potable water before specifying it for a domestic system. Because the press connection style is specific to PEX Press tooling, verify jaw compatibility with the crimp or press system already installed on the job to avoid mixing incompatible tools and fittings across a rough-in.
Frequently Asked Questions
What's the difference between an angle and a straight PEX Press stop valve?
An angle stop valve turns the water supply 90 degrees between the wall or floor connection and the fixture riser, the common configuration behind a toilet. A straight stop valve keeps the same line direction, matching under-sink rough-in where the riser lines up with the supply line. Both styles use the same 1/2-inch PEX Press inlet and 3/8-inch OD compression outlet, so the choice comes down to the rough-in geometry at the fixture.
What pressure and temperature range do PEX Press stop valves handle?
Viega's PEX Press stop valves carry a maximum working pressure of 200 psi and a temperature range of 36°F to 250°F. The range covers standard residential and light commercial domestic hot and cold water service. Checking the specific manufacturer's data sheet confirms the rating before specifying the valve for a higher-demand application.
What tool is needed to install a PEX Press stop valve?
PEX Press stop valves connect to PEX tubing with a press tool rather than a crimp tool or solder joint. Installers compress a stainless steel sleeve over the tubing and valve connection to create the joint, and the jaw size on the press tool needs to match the valve's inlet size. Confirming compatibility between the press system already in use on the job and the valve manufacturer prevents a mismatched connection.
What outlet connection does a PEX Press stop valve use for the riser?
Most PEX Press stop valves use a 3/8-inch OD compression outlet, which accepts flexible braided connectors, copper risers, or poly risers without an additional adapter. The flexibility lets installers match whatever riser type is already specified for the fixture. Confirming the compression outlet size against the riser on hand avoids an extra trip for adapters.
Are PEX Press stop valves lead-free and safe for potable water?
PEX Press stop valves from Viega are manufactured lead-free and approved for potable water use. Brass valve bodies and press connections meet the same lead-free requirements as the rest of a PEX Press piping system. Confirming the lead-free rating on the product packaging or data sheet verifies compliance before installation on a domestic water line.