Apply to be a TradeMaster!
Filter menu expanded

Filters

4 items
Reset

SORT

Product Availability
–

Show In Stock Only (4)

Air Flow Capacity (CFM)
–

50 (2)
80 (4)
110 (4)

Sone
–

0.3 (2)
0.4 (1)
0.8 (2)
1.0 (1)

Review Score
–

(3)

Panasonic WhisperFit Ventilation Fans

Help Face
Need a little help?
4 items
Grid
List
Compare
Product Image of Panasonic WhisperFit Retrofit Ceiling Mount Bathroom Exhaust Fan, 50-80-110 CFM, FV-0511VF1
$140.99 each
In Stock
Get 353 by Mon, Nov 23
In Stock
Get 353 by Mon, Nov 23
Compare
Product Image of Panasonic WhisperFit Ceiling Mount Bathroom Exhaust Fan with Dimmable LED Light, 50-80-110 CFM, FV-0511VFL1
$195.99 each
In Stock
Get 183 by Mon, Nov 23
In Stock
Get 183 by Mon, Nov 23
Compare
Product Image of Panasonic WhisperFit Ceiling Mount Bathroom Exhaust Fan with Humidity Sensor, 50-80-110 CFM, FV-0511VFC1
$183.99 each
In Stock
Get 25 by Mon, Nov 23
In Stock
Get 25 by Mon, Nov 23
Compare
Product Image of WhisperFit DC Ventilation Fan with Dual Bluetooth Speakers, 50/80/110 CFM, Ultra-Quiet, FV-0511VFBL1
$248.99 each
In Stock
Get 10 by Mon, Nov 23
In Stock
Get 10 by Mon, Nov 23
Resources
FAQs, Manuals & Videos
Videos
Other Resources
Articles
More About Panasonic WhisperFit Ventilation Fans

Panasonic WhisperFit Ventilation Fans are bathroom exhaust fans built to clear moisture and odor from tight spaces without adding noise to a job site. The WhisperFit DC line runs on an ECM motor with a Pick-A-Flow selector, letting an installer dial in 50, 80, or 110 CFM from a single housing instead of stocking three separate fan bodies. Field-adjustable airflow matters on remodel jobs where duct runs and room size are not confirmed until the housing is already set in the ceiling. Every WhisperFit DC model carries ENERGY STAR certification and meets ASHRAE 62.2 ventilation requirements, so the fan satisfies code on projects that specify continuous or intermittent bathroom exhaust. Contractors also rely on the WhisperFit housing for its low profile, which fits between standard joist spacing without extra framing work. Because the CFM setting adjusts in the field, one SKU covers half bath, full bath, and larger bathroom applications, cutting down on truck stock and reducing the chance of a callback when room size changes mid-project.

Subcategories

  • WhisperFit DC Standard Fan: The standard WhisperFit DC model uses an ECM motor and a Pick-A-Flow selector to switch between 50, 80, and 110 CFM without swapping housings. Installers reach for it on straightforward bathroom exhaust jobs where a fixed vent point serves a single room. It carries ENERGY STAR certification and meets ASHRAE 62.2 ventilation requirements, so it satisfies most residential code checks without additional documentation. Electricians and remodelers use it as the default choice when a project does not call for humidity sensing or an integrated light.
  • WhisperFit DC Condensation Model: The condensation model adds onboard humidity sensing that tracks relative humidity and temperature and switches the fan on automatically once moisture crosses a trigger point. A built in 20 minute delay timer keeps the fan running after activation to finish clearing the room. Contractors specify it for enclosed showers, steam-prone bathrooms, or rental units where an occupant may forget to run the fan manually. Like the standard model, it offers the same 50, 80, or 110 CFM range through the Pick-A-Flow selector.
  • WhisperFit DC Dimmable LED and Nightlight Model: The dimmable LED model combines the WhisperFit DC ventilation platform with a 700 lumen, 3000K LED panel rated for 50,000 hours and a separate nightlight circuit drawing less than 1 watt. Remodelers and electricians install it in bathrooms where the fixture needs to replace both the exhaust fan and the overhead light in one ceiling cutout. The dimmable panel lets an occupant adjust brightness without changing fan speed, since the CFM control stays independent through Pick-A-Flow. It suits primary bathrooms and combo fan-light retrofits where reducing the number of ceiling fixtures matters more than a bare-bones fan.

Buying Guide

Start with room size and required CFM. Bathrooms under 100 square feet typically need at least 1 CFM per square foot, so a 50 or 80 CFM setting covers most half baths and single-occupant bathrooms, while a full bath with a soaking tub or steam shower often calls for the full 110 CFM setting. Duct run length and the number of elbows also affect real-world airflow, so confirm the rated CFM holds at the actual static pressure of the installed duct, not just the rating printed on the box.

Next, decide whether the fan needs to run on its own. Panasonic WhisperFit Ventilation Fans cover that question directly: the condensation sensor model activates automatically once humidity rises, which fits rentals, guest baths, or any room where occupants are unlikely to switch on the fan themselves. Standard models depend on a wall switch or timer, which works fine in primary bathrooms where the resident controls fan use directly.

Finally, weigh whether the ceiling opening should also carry lighting. The dimmable LED and nightlight model saves a second fixture cutout and a separate light circuit, which can shorten install time on a retrofit where opening additional drywall is not practical. Confirm the housing depth clears the joist bay before rough-in, since low profile housings still need clearance for the duct collar and electrical box behind the housing.

Frequently Asked Questions

What CFM rating works best for a standard bathroom?

Panasonic WhisperFit Ventilation Fans cover most single bathrooms with the 50 or 80 CFM setting on the Pick-A-Flow selector, since ventilation codes generally call for roughly 1 CFM per square foot of floor area. Bathrooms with a soaking tub, steam shower, or connected walk-in closet often need the full 110 CFM setting to clear humidity fast enough. Duct length and elbow count still affect real airflow, so the setting should account for the full run, not just room size.

How does the condensation sensor model turn on automatically?

The condensation model in the WhisperFit DC lineup monitors relative humidity and temperature inside the room and switches the fan on once moisture crosses a preset trigger point. A built in 20 minute delay timer keeps the fan running after the trigger clears so residual moisture has time to exhaust. Contractors use this feature in rentals and guest bathrooms where occupants may not turn the fan on manually.

Can the dimmable LED model replace both the exhaust fan and the ceiling light?

Yes, the WhisperFit DC dimmable LED and nightlight model combines a 700 lumen, 3000K LED panel with the standard ventilation platform in one housing. A separate nightlight circuit under 1 watt runs independently of the main light and fan, so all three functions share a single ceiling cutout. Combining fan, light, and nightlight in one housing suits remodels where opening additional drywall for a second fixture is not practical.

Are WhisperFit fans rated for use above a shower or tub?

WhisperFit DC models are UL listed for installation over a tub or shower enclosure when wired through a GFCI-protected circuit. Every WhisperFit DC variant, including the standard, condensation, and dimmable LED models, carries this same listing. Confirming the circuit has GFCI protection before rough-in keeps the installation compliant with the listing requirement.

Do WhisperFit fans meet ENERGY STAR and ASHRAE ventilation requirements?

Panasonic WhisperFit Ventilation Fans carry ENERGY STAR certification across the standard, condensation, and dimmable LED models. Each variant also meets ASHRAE 62.2 ventilation requirements and complies with California Title 24, which covers most jurisdictions that reference those standards in their mechanical code. Meeting both certifications in one fixture removes the need to cross-check separate code requirements for efficiency and ventilation rate.

Didn't find what you're looking for? 
Let us know
.