ProPEX Brass 90° Elbows are Uponor fittings that make tight, 90-degree connections for Uponor PEX tubing in supply and return mains. SupplyHouse lists lead-free brass versions, including the LF4710750 3/4" ProPEX elbow and the LF4730500 1/2" ProPEX x 1/2" male sweat elbow. Uponor notes that a ProPEX tool is required for installation and that ProPEX rings must be purchased separately. Crews should count rings and confirm tool availability when they plan a job. The LF2895050 adds a 1/2" copper stub option with listed stub dimensions of 8" x 13". Elbows like these give installers a defined turn point in the run, which makes layouts easier to plan and inspect. Choosing the correct size and end connection before the job starts keeps the rough-in moving and avoids a second trip to the supplier.
Subcategories
Buying Guide
Start with the connection types, because each end of the elbow has to match what it joins. A ProPEX by ProPEX elbow joins two runs of Uponor PEX tubing. A ProPEX by male sweat elbow, such as the LF4730500, moves from PEX to a sweat connection. A copper stub elbow, such as the LF2895050, adds a copper stub listed at 8" x 13". Next, confirm the size. SupplyHouse lists the LF4710750 as a 3/4" elbow and the LF4730500 as 1/2" by 1/2", so match the fitting to the tubing diameter on the run.
Then check the material and the intended use. The LF4710750 and LF4730500 are listed as lead-free brass, and Uponor describes its ProPEX lead-free brass elbows as built for tight 90-degree connections on supply and return mains. If the application does not match that description, contact Uponor Technical Services before ordering.
When comparing ProPEX Brass 90° Elbows with other fitting styles, factor in the installation method. Uponor notes that a ProPEX tool is required and that ProPEX rings must be purchased separately, so add rings to the order for every connection and confirm the crew has a ProPEX tool. Finally, verify each model number against the plans or the existing system before ordering, and keep the model numbers on the purchase order so the field crew can match each fitting to its run.
Frequently Asked Questions
What are ProPEX Brass 90° Elbows used for?
ProPEX Brass 90° Elbows make tight, 90-degree connections for Uponor PEX tubing in supply and return mains, according to Uponor. They give installers a clean direction change in the run. SupplyHouse lists lead-free brass versions such as the LF4710750.
Do I need a special tool to install ProPEX Brass 90° Elbows?
Yes, Uponor states that a ProPEX tool is required to install ProPEX Brass 90° Elbows. ProPEX rings must also be purchased separately. Plan both before heading to the job.
What sizes of ProPEX Brass 90° Elbows does SupplyHouse list?
SupplyHouse lists the LF4710750 as a 3/4" ProPEX elbow and the LF4730500 as a 1/2" ProPEX x 1/2" male sweat elbow. The LF2895050 pairs a 1/2" ProPEX brass connection with a 1/2" copper stub of 8" x 13". Check the listing for the full size range.
Are ProPEX Brass 90° Elbows lead-free?
The LF4710750 and LF4730500 ProPEX elbows are identified as lead-free brass in their SupplyHouse product titles. Uponor also markets a dedicated line of ProPEX lead-free brass elbows. Confirm the lead-free requirement for the project with the local authority.
Can ProPEX Brass 90° Elbows connect PEX to copper?
The LF4730500 is a 1/2" ProPEX x 1/2" male sweat elbow, which Uponor lists as 1/2" PEX x 1/2" male copper. The LF2895050 pairs a ProPEX brass connection with a copper stub. Verify the connection type against the existing piping before ordering.