ProPEX Drop Ear Elbows are lead-free brass fittings that join Uponor PEX tubing to a threaded female connection while anchoring the joint to a stud or blocking behind the wall.
Each elbow pairs a ProPEX expansion end, sized for Uponor AquaPEX tubing, with a female iron pipe thread on the other end, plus mounting ears with screw holes that hold the fitting rigid under load.
The line meets ASTM F1960 and ASTM F877 material standards and carries NSF/ANSI 359 certification for lead-free potable water use.
Sizes run from 1/2 inch through 1 inch PEX, including a mixed 1/2 inch PEX by 3/8 inch FIP option, covering shower valve stub-outs, hose bibs, and fixture supply connections where a rigid, wall-anchored fitting matters more than a flexible joint.
Because the connection point needs the ProPEX expansion tool and rings rather than a crimp, installers working primarily in crimp systems should confirm tooling compatibility before specifying this elbow on a job.
Subcategories
Buying Guide
Match the FIP thread size to the fixture or valve the elbow feeds before matching the PEX side to the branch line already run. A lavatory supply stop or single shower port typically takes a 1/2 inch FIP connection, while a hose bib or larger valve body often needs 3/4 inch. ProPEX Drop Ear Elbows are not universal fittings; a mismatched thread size means re-ordering rather than forcing a fit with tape or a bushing. Confirm the PEX side matches the tubing diameter already run to that point, since the expansion ring and tool are sized to the tubing, not the fitting body. Mounting ears need solid blocking or stud framing behind the finished wall location, since the elbow relies on screws through those ears to stay rigid when a valve or stop is threaded onto the FIP end later. Crews running a crimp-based PEX system need to confirm they also carry a ProPEX expansion tool and compatible rings, since this elbow family uses the expansion connection method exclusively and will not accept a crimp ring. For code compliance on potable water jobs, confirm the fitting carries ASTM F1960, ASTM F877, and NSF/ANSI 359 marking, standard across the lead-free brass elbows in this category. Stock a small range of FIP sizes; 1/2 inch by 1/2 inch and 3/4 inch by 3/4 inch cover most residential fixture work, while the 1/2 inch by 3/8 inch mixed size and 1 inch by 1 inch model handle the less common connections a remodel or mechanical room job might call for.
Frequently Asked Questions
What's the difference between a ProPEX drop ear elbow and a regular PEX elbow?
A drop ear elbow includes mounting ears with screw holes that anchor the fitting to a stud or blocking behind the wall, holding it rigid when a valve or fixture threads onto the FIP end. A standard PEX elbow has no mounting ears and relies on the tubing alone to hold its position. Drop ear elbows suit shower valves, hose bibs, and other spots where a fixture threads directly onto the fitting. The rigid mount keeps the connection from shifting when torque is applied threading on a valve body.
What tool does a ProPEX drop ear elbow need for installation?
ProPEX fittings use an expansion connection rather than a crimp ring, which means installation needs a ProPEX expansion tool along with the matching expansion rings sized to the fitting. Crews running a crimp-only PEX system need to add this tool before specifying ProPEX fittings on a job. The expansion method stretches the tubing and ring over the fitting barb, which then contracts to seal as the PEX relaxes. Skipping the correct tool is not an option, since a crimp ring will not seal this fitting type.
What sizes are available for ProPEX drop ear elbows?
The line covers 1/2 inch, 3/4 inch, and 1 inch PEX sizes on the ProPEX side, with a mixed 1/2 inch PEX by 3/8 inch FIP version covering smaller fixture threads. Matching the PEX side to the tubing already run and the FIP side to the fixture or valve covers most sizing decisions. The mixed-size elbow lets a 1/2 inch branch connect to a 3/8 inch fixture thread without an extra reducing fitting. Checking both sides of the fitting before ordering avoids a mismatched connection.
Are ProPEX drop ear elbows safe for potable water?
The elbows are made from lead-free brass meeting ASTM F1960 and ASTM F877 material standards, with NSF/ANSI 359 certification covering lead-free compliance for potable water use. The certification applies across the sizes in the line, from the 1/2 inch connections through the 1 inch models. Code officials generally accept NSF/ANSI 359 marking as proof of lead-free compliance on inspection. Checking for the marking on the fitting body confirms the certification before installation.
Where are drop ear elbows typically installed on a job?
Drop ear elbows are common behind shower and tub valves, at hose bib stub-outs, and anywhere a fixture or valve threads directly onto a wall-mounted fitting. The mounting ears let a plumber screw the fitting to blocking or a stud before the wall is closed in, keeping the connection rigid for the life of the fixture. Fixture supply stops and valve bodies both rely on this rigidity to thread on without stripping or shifting the fitting. Rough-in inspections often check that these elbows sit square and solidly mounted before drywall is installed.