ProPEX Expander Tools & Heads are the battery-powered tools and interchangeable heads used to make Uponor's PEX-a cold expansion connections. The Milwaukee M12 ProPEX expansion tool handles connections from 3/8 inch to 1 inch, while the M18 version steps up to cover 3/8 inch through 1-1/2 inch connections in the same expansion system. Each tool uses an auto-rotating head that expands the PEX tubing and fitting evenly around the full circumference with one-handed operation, rather than requiring the installer to rotate the tool manually between expansion strokes. Radiant heating, hydronic, and plumbing installers who work regularly with PEX-a tubing rely on this expansion method instead of crimp rings or clamps, since the expanded fitting shrinks back around the tubing to form the seal. Selecting the right tool size and head combination for the connection sizes on a given job keeps a crew from having to switch systems mid-installation.
Subcategories
Buying Guide
Deciding between M12 and M18 ProPEX Expander Tools & Heads starts with the largest connection size expected on the job, since the M12 tool covers 3/8 inch through 1 inch while the M18 tool extends the range up to 1-1/2 inch. Residential plumbing and radiant work that rarely goes beyond 1 inch connections generally does not need the larger M18 platform, and the more compact right-angle design of the M12 tool fits tighter spaces such as joist bays and mechanical closets better than the larger D-handle M18 unit. Commercial and multi-family projects running larger PEX branch lines benefit from the M18's extended range and reduced need to switch tools mid-job when connection sizes vary. Battery platform also factors into the decision, since a crew already running M12 or M18 tools for other trades can share batteries and chargers across the fleet rather than adopting a second platform just for PEX expansion. Expansion heads are sold separately from the base tool in most cases, so confirming which head sizes are included in a kit against the sizes actually needed on the job prevents an unexpected extra purchase before a run gets started. Because Uponor's standard expander heads fit both tool platforms, though without the auto-rotating feature on Milwaukee-branded heads, a crew switching from one platform to the other can often reuse existing heads rather than replacing the full head set. Matching tool size, head inventory, and battery platform against project scope keeps the expansion process moving without gaps.
Frequently Asked Questions
What is the difference between the M12 and M18 ProPEX expansion tools?
The M12 tool handles connections from 3/8 inch to 1 inch using a compact right-angle design, while the M18 tool extends the range to 1-1/2 inch using a D-handle design. Larger commercial PEX runs typically call for the M18 tool's extended range. Both tools use an auto-rotating head for one-handed operation.
Are Uponor expansion heads interchangeable between the M12 and M18 tools?
Standard Uponor expander heads fit both the M12 and M18 tool bodies, though they lack the auto-rotating function built into the Milwaukee-branded heads. Milwaukee-branded heads for the M12 and M18 platforms are not cross-compatible with each other. Confirming which head style is on hand before starting a job avoids a mismatch on-site.
What expansion heads are included with the ProPEX tool kits?
The M12 kit includes 1/2 inch, 3/4 inch, and 1 inch expansion heads, with 3/8 inch and 5/8 inch heads sold separately. The M18 kit includes 1 inch, 1-1/4 inch, and 1-1/2 inch expansion heads. Additional heads outside the included sizes need to be purchased separately depending on the connection sizes required on a job.
What is included in a ProPEX expansion tool kit besides the tool?
Both the M12 and M18 kits include two batteries, a 30-minute charger, lubricating grease, and a carrying case in addition to the expansion tool and included heads. The grease is used during expansion to help the head move smoothly through the fitting. Having a full kit on hand keeps a crew from needing to source accessories separately before starting a job.
Why does the ProPEX expansion tool use an auto-rotating head?
An auto-rotating head expands the PEX tubing and fitting evenly around the full circumference while an installer holds the tool in place with one hand. Manual rotation between expansion strokes is not required with this feature, which speeds up repetitive connections on a large job. Both the M12 and M18 Milwaukee ProPEX tools include this auto-rotating function.