The Ball Valve Bracket Kit contains the parts necessary
to install an OpenAir™ GDE/GLB, series non-spring
return actuator or OpenAir GMA and GQD series spring
return actuator to a 599 Series two-way or three-way
ball valve.
The actuator is held in place by securing it to the
bracket shaft. The bracket shaft is held in place when
the bracket is properly screwed to the valve body.
Includes:
- 6/32-inch × 3/4-inch screw for handle
- Ball valve handle
- Bracket shaft
- Bracket screws: M4 × 0.7 × 50 mm (New configuration)
- Bracket screws: M4 × 0.7 × 53 mm (Old configuration)
- Bracket