Flowrite globe valves are Siemens control valves designed to work with pneumatic or electronic actuators that have a 3/4 inch stroke, and the sampled valve bodies on this page are stainless steel. The two-way bodies sampled are 1/2 inch and 1 inch with FNPT x FNPT connections and flow capacities of 4 Cv and 10 Cv. Descriptions list ANSI Leakage Class IV, or 0.01% of Cv, and cartridge-type packing. Typical applications for the 599 Series two-way bodies include control of hot or chilled water, 50% water-glycol solutions or steam. The page also lists SKB electronic actuators and a position indicator auxiliary switch for SKB, SKC and SKD models. Matching the body, actuator and accessories to the stroke and control signal matters, because a mismatched set won't modulate the valve as intended.
Subcategories
Buying Guide
Start with stroke and actuator compatibility. The Flowrite valve bodies sampled here are described as designed to work with pneumatic or electronic actuators with a 3/4 inch stroke, so confirm the actuator matches that stroke before choosing a set.
Next, pick the body pattern and position. The sampled bodies are two-way, in normally open and normally closed versions, with FNPT x FNPT connections in 1/2 inch and 1 inch sizes. Equal percentage flow is listed for the normally closed port and linear flow for the normally open port.
Then size by flow. The sampled bodies list 4 Cv for the 1/2 inch size and 10 Cv for the 1 inch size, so match Cv to the design flow and pressure drop for the coil or loop. Flowrite Globe Valves also list greater than 100:1 rangeability and ANSI Leakage Class IV, or 0.01% of Cv.
Finally, choose the actuator and accessories. The SKB electronic spring return actuator takes a 0 to 10 VDC control signal at 24 VAC and draws 18 VA, so check that the controller output and transformer capacity match. If a control system needs a signal at the 0% stroke position, the position indicator auxiliary switch for SKB, SKC and SKD models provides one. Record the stroke, Cv and control signal for each loop to speed reorders.
Frequently Asked Questions
What stroke do Flowrite globe valves use?
The sampled Flowrite globe valves are described as designed to work with pneumatic or electronic actuators with a 3/4 inch (20 mm) stroke. Confirm the actuator stroke before ordering a body.
What Cv ratings are listed on the 2-way Flowrite bodies?
The sampled Flowrite globe valves list 4 Cv for the 1/2 inch two-way stainless steel body and 10 Cv for the 1 inch two-way body. Check each listing's Cv against the design flow for the loop.
What fluids can Flowrite globe valves control?
The Flowrite 599 Series two-way valve bodies list typical applications of hot or chilled water, 50% water-glycol solutions or steam. Confirm the application against the product page before specifying.
What electrical specs does the SKB actuator list?
The sampled SKB electronic spring return actuator for Flowrite globe valves lists 24 VAC power, 18 VA power consumption and a 0 to 10 VDC control signal. The description also notes it can receive a 4 to 20 mA signal.
What does the position indicator auxiliary switch do?
The auxiliary switch for SKB, SKC and SKD actuators used with Flowrite globe valves sends a signal to indicate the valve is in the 0% stroke position. The switching point is fixed at that position.