Straight-through Supports are rigid supports for flexible tubing where it comes through a floor on its way to a fixture. Uponor (Wirsbo) lists a 1/2" Metal Straight-through Support that provides rigid support for 1/2" PEX tubing as it exits a floor. Sioux Chief's 1/2" CTS Straight Floor Sleeve Supports are described as zinc-plated, 18-gauge metal that is rust resistant. Sioux Chief's shorter tube option allows the support to be concealed with an escutcheon when it penetrates a finished floor or base cabinet. The Uponor and Sioux Chief supports mentioned are for 1/2" tubing, so confirm the tubing type and size before ordering. Picking the correct support matters because the support protects the tube at the penetration and decides how cleanly the stub-out finishes at the floor or cabinet.
Subcategories
Buying Guide
Start with the tubing type and size. The Uponor (Wirsbo) 1/2" Metal Straight-through Support is listed for 1/2" PEX tubing, and the Sioux Chief 1/2" CTS Straight Floor Sleeve Supports are listed for rigid support of flexible 1/2" CTS tubing, with an application of 1/2" PEX. Confirm which tubing the project uses before comparing anything else. Size is the second filter, and the supports named here are all 1/2" size.
Next, think about where the support will be seen. When the penetration lands in a finished floor or base cabinet, Sioux Chief's shorter tube option allows the support to be concealed with an escutcheon. When the tube runs through the sub floor directly to a fixture, the standard Sioux Chief support is described as supporting and protecting the tube.
Check the construction. Sioux Chief describes its supports as zinc-plated, 18-gauge metal that is rust resistant, while the Uponor (Wirsbo) support is listed as a metal straight-through support. Compare Straight-through Supports on those material details and on warranty, since the Uponor listing shows a 2 year warranty.
Finally, confirm the fit against the rough-in plan before ordering. Verify tubing size, the finish condition at the penetration and the fixture connection, then choose the matching support. Installation details belong with the manufacturer literature and the product listing.
Frequently Asked Questions
What size tubing do straight-through supports fit?
The Uponor (Wirsbo) Metal Straight-through Support is listed for 1/2" PEX tubing, and the Sioux Chief supports are listed in a 1/2" size for 1/2" CTS tubing. Straight-through supports named in these listings are 1/2" size. Verify the tubing type and size on the product page before ordering.
What are straight-through supports used for?
Straight-through supports give flexible tubing rigid support at a floor penetration. The Uponor listing describes its 1/2" support as rigid straight-through support for 1/2" PEX tubing as it exits a floor. Sioux Chief describes its supports as supporting and protecting the tube through the sub floor going directly to the fixture.
What is the Sioux Chief straight floor sleeve support made of?
Sioux Chief describes its 1/2" CTS straight floor sleeve support as zinc-plated, 18-gauge metal that is rust resistant. Straight-through supports in that line are built for rigid support of flexible 1/2" CTS tubing. Confirm the finish on the specific listing.
How can I hide a straight-through support at a finished floor?
Sioux Chief's 1/2" CTS Straight Floor Sleeve Support with Short Tube Protector is the shorter tube option. The shorter tube allows the support to be concealed with an escutcheon when it penetrates a finished floor or base cabinet. Check the escutcheon fit on the job before ordering.
Do straight-through supports come with a warranty?
The Uponor (Wirsbo) 1/2" Metal Straight-through Support lists a 2 year warranty. Warranty terms for other straight-through supports are not shown in every listing. Check each product listing for its warranty details.