Suntouch Radiant Mats (240V) are electric radiant floor heating mats that use a braided twin wire design to register nearly zero EMF. The mats on this page are 240 volt models, and the 3 ft wide options include 30, 40, and 50 square feet of coverage. Installation accessories are listed with the mats, including the Extra SunStat Floor Sensor and the LoudMouth Meter. Suntouch describes its electric radiant floor heat mats as a simple and easy way to install an electric radiant heat system. For contractors, the value comes from matching mat size and voltage to the floor plan before work starts, then checking the heating element for damage with a meter during the install. Getting those choices right early keeps a heated floor job on schedule and avoids rework once the floor covering is set.
Subcategories
Buying Guide
Start with the supply voltage and the room dimensions. Suntouch makes its mats in both 120 volt and 240 volt forms, and the models here are 240 volt, so confirm the circuit voltage before anything else goes on the order. Next, measure the floor area to be heated and compare it to the coverage sizes shown in the listing, such as 30, 40, and 50 square feet.
Match mat length to the room layout. The listed 3 ft wide mats include lengths of 10 ft, 13.3 ft, and 16.6 ft, so a long, narrow space may favor a different size than a square one. Choosing the closest fit to the open floor area keeps the layout straightforward.
When comparing Suntouch Radiant Mats (240V) with each other, look at the accessories as part of the same decision. The Extra SunStat Floor Sensor is a 15 ft wire listed for use with models 500675-SB and 500670-SB, so confirm the thermostat model first. The LoudMouth Meter is worth adding to the order for testing. Its TEST button simulates a damage condition before work starts, and its red light and alarm signal loose lead wires or damage to the heating product.
Finally, check the product record for each size before purchase, since dimensions and coverage differ from one mat to the next.
Frequently Asked Questions
What voltage do Suntouch Radiant Mats (240V) run on?
Suntouch Radiant Mats (240V) run on 240 volts, as the product records for the 30, 40, and 50 square foot mats show. Suntouch also makes these mats in 120 volt forms, so check the voltage on the model before ordering. Confirm it against the circuit planned for the install.
What sizes of Suntouch 240V radiant mats are listed?
The Suntouch 240V radiant mats on this page include 30 sq ft (3' x 10'), 40 sq ft (3' x 13.3'), and 50 sq ft (3' x 16.6') models. All three are 3 ft wide. Check the individual product page for coverage and length before ordering.
Why do Suntouch radiant mats use a braided twin wire design?
Suntouch electric radiant floor heat mats use a braided twin wire design so the mat registers nearly zero EMF. Suntouch states that its heated floor mats were the first with this patented innovation.
What does the LoudMouth Meter do with Suntouch radiant mats?
The LoudMouth Meter, listed with Suntouch Radiant Mats (240V), takes the heating product's lead wires at the L1 and L2 terminals and the ground wire at the G terminal. A green light means it is operating, while a red light and alarm mean lead wires have come loose or the heating product is damaged. Pressing TEST simulates a damage condition before work begins.
What floor sensor goes with Suntouch radiant mat thermostats?
The Extra SunStat Floor Sensor is a 15 ft sensor wire for programmable or non-programmable thermostats. Its listing shows use with models 500675-SB and 500670-SB. Verify the thermostat model before adding it to a Suntouch Radiant Mats (240V) order.