Suspended Pipe Radiant Heat Packages are kits that bundle the tubing and hardware for a radiant floor heating zone installed in the joist bays of an existing floor. The Uponor SUSPIPE500U covers 500 square feet and includes three 300 foot coils of 1/2 inch hePEX plus oxygen barrier tubing, for 900 feet in total. It also includes a 3 loop TruFlow Jr. manifold assembly, bend supports, PEX clips, a tube cutter, and a pressure test kit. SupplyHouse lists Bluefin packages from 250 to 1500 square feet, along with Uponor kits such as the 250 and 500 square foot versions. The SUSPIPE500U does not include pumps, controls, or valves that may be needed to finish the system, so the package covers the tubing side of the job rather than the whole mechanical room. Matching the package to the zone size early keeps material counts accurate, limits mid-job supply runs, and gives the crew a clear starting point for the heat source and control design.
Subcategories
Buying Guide
Start with the heated square footage and match it to a package size. Bluefin lists suspended pipe kits at 250, 500, 750, 1000, and 1500 square feet, and Uponor lists kits such as the 250 square foot SUSPIPE250U and the 500 square foot SUSPIPE500U. Choose the size that covers the zone, then check how many tubing loops the included manifold serves.
Confirm joist spacing next. The SUSPIPE500U is designed for 16 inch joist bays, so framing at a different spacing needs a design check before ordering. Verify tubing size and fitting style as well. The SUSPIPE500U uses 1/2 inch oxygen barrier PEX and lists PEX compression fitting compatibility, which matters when new loops have to match existing tools and parts on the truck.
When comparing Suspended Pipe Radiant Heat Packages, read each contents list line by line. The SUSPIPE500U includes a tube cutter, a pressure test kit, PEX clips, bend supports, and a 3 loop manifold assembly, but it does not include pumps, controls, or valves that may be needed. Budget those items separately so the job doesn't stall at startup.
Finish by checking the heat source. Confirm the boiler or water heater can deliver the output the zone needs, and run a load calculation when the layout is irregular. Package size sets the tubing and hardware, not the heating capacity.
Frequently Asked Questions
What's included in a suspended pipe radiant heat package?
Suspended pipe radiant heat packages bundle tubing and installation hardware for a joist bay radiant zone. The Uponor SUSPIPE500U, for example, includes three 300 foot coils of 1/2 inch hePEX plus tubing, a 3 loop manifold assembly, bend supports, PEX clips, a tube cutter, and a pressure test kit. Check each listing for its exact contents.
Do suspended pipe packages come with the pump and controls?
The Uponor SUSPIPE500U does not include pumps, controls, or valves that may be necessary to complete the installation. Suspended pipe radiant heat packages cover the tubing side of the job, so those components get sourced separately. Read the contents list on each package before ordering.
What joist spacing does the Uponor 500 sq ft suspended pipe package fit?
The Uponor SUSPIPE500U is designed for 16 inch joist bays. With suspended pipe radiant heat packages, joist spacing drives the layout, so verify the framing before ordering. Other spacing calls for a design check.
What sizes do suspended pipe radiant heat packages come in?
Bluefin suspended pipe packages are listed at 250, 500, 750, 1000, and 1500 square feet. Uponor lists suspended pipe radiant heat packages including the SUSPIPE250U and SUSPIPE500U at 250 and 500 square feet. Pick the size that matches the heated floor area.
What tubing comes in the Uponor SUSPIPE500U package?
The Uponor SUSPIPE500U includes 900 feet of 1/2 inch oxygen barrier hePEX plus tubing, supplied as three 300 foot coils. The listing shows PEX compression fitting compatibility. Crews working with PEX compression fittings can match their existing parts to this suspended pipe radiant heat package.