| Material: | Cast Iron |
|---|---|
| Application: | Heating |
| Type: | Pump Part |
| Used With: | 009 Series |
yes it will fit. if the motor and impeller is the issue, yes.
Not sure about the stainless steel model, but as far as that cartridge being the only moving part, you are correct. I've replaced these and it has fixed a noisy, poor-performing pump.
You need to shut off the power and isolate the pump from the water supply. When cool loosen the 4 bolts on the pump housing and break seal to relieve pressure on the cartridge. Take the 4 bolts out and the cartridge should pull out of the stator motor. Replace with new unit and replace seal install 4 bolts turn on water and check for leaks. Turn on power and unit should work.