9S Series 4/10 HP Sewage Pumps are Little Giant submersible pumps that pump sewage from a collection basin to the discharge line. The 9S-CIA-RFS is rated 4/10 HP and 80 GPM, with a 2 inch discharge and a 15 foot power cord. It comes with a piggyback mechanical float switch, while the 9S-CIM is a manual submersible sewage ejector pump. Pit Plus sewage basin systems built around the 9S 4/10 HP pump come pre-assembled or unassembled. Contractors use the series for pump replacements in an existing basin and for complete new basin packages. Choosing the right style early keeps the install on schedule and cuts callbacks. Float type, cord length, and discharge size are the details to confirm first, since a mismatch means a second trip for parts.
Subcategories
Buying Guide
Start with the job type. A pump swap in an existing basin calls for a pump-only model, while a new installation may call for a complete basin system. Measure the basin and the discharge line before choosing a model. The Pit Plus sewage basin systems come pre-assembled or unassembled, so decide how much assembly the crew wants to handle.
Next, pick the switching style. The 9S-CIA-RFS includes a piggyback mechanical float switch for automatic cycling, and the 9S-CIM is manual, so it needs a separate control or switch. Match the style to how the basin is already wired.
When comparing 9S Series 4/10 HP Sewage Pumps, check the listed performance and connections. Both the 9S-CIA-RFS and the 9S-CIM are listed at 4/10 HP and 80 GPM, and both list a 15 foot power cord. The 9S-CIA-RFS lists a 2 inch discharge, so confirm the discharge size against the existing piping. Verify the details on the individual product page, because models and cord lengths vary across the series.
Finally, confirm the electrical details and the code requirements. Verify voltage, circuit protection, and the cord length against the pit location, and follow local plumbing and electrical code. Review the manufacturer's installation instructions before the pump goes into service. Keep the model number and item number on the job record for warranty or service calls.
Frequently Asked Questions
What are 9S Series 4/10 HP Sewage Pumps used for?
9S Series 4/10 HP Sewage Pumps are submersible Little Giant pumps for moving sewage from a basin. The 9S-CIA-RFS is listed at 4/10 HP and 80 GPM with a 2 inch discharge. Confirm the application and basin setup before specifying a model.
What's the difference between the 9S-CIA-RFS and the 9S-CIM?
The 9S-CIA-RFS comes with a piggyback mechanical float switch for automatic operation. The 9S-CIM is a manual submersible sewage ejector pump. Both 9S Series 4/10 HP sewage pumps are listed at 80 GPM with a 15 foot power cord.
Do 9S Series pumps come as a complete basin system?
Yes. The 9S Series 4/10 HP sewage pump is also offered in Pit Plus sewage basin systems in the 9S-SMPX-LG configuration. Pre-assembled versions, such as 509118, and unassembled versions, such as 509090, are listed.
What discharge size does the 9S-CIA-RFS have?
The 9S-CIA-RFS, a 9S Series 4/10 HP sewage pump, is listed with a 2 inch discharge. Check that size against the existing discharge piping before ordering. Plan for any needed fittings if the piping differs.
How long is the power cord on the 9S-CIA-RFS?
The 9S-CIA-RFS and the 9S-CIM 4/10 HP sewage pumps are each listed with a 15 foot power cord. Measure the distance from the basin to the outlet or control before ordering. Verify the cord length on the product page for the exact item.