PVC Fittings

















































| PRODUCT | SIZE | SINGLE UNIT | BOX UP & SAVE | STOCK STATUS | LIST | COMPARE |
|---|
CPVC Schedule 80 Fittings are the elbows, tees, adapters and plugs used to build and terminate Schedule 80 CPVC piping runs. The catalog sample on this page comes from Spears, whose Schedule 80 CPVC fitting designs combine years of proven experience with computer generated stress analysis. Spears states that material reinforcement is placed uniformly in stress concentration areas for improved pressure handling capability, and that the finished fittings go through numerous verification tests. The Spears line is described as covering sizes from 1/4" through 24", so the listing spans small and large pipe sizes. Sampled products include 1/4" 90 degree and 45 degree socket elbows, a 3/4" x 3/4" x 1/2" reducing tee, a 1-1/2" male adapter and a 3" plug. Fitting type, size and connection type decide whether a part fits the job, so a clear view of the options keeps takeoffs accurate.
Subcategories
Buying Guide
Start with the fitting type, then confirm size and connection. Elbows turn a run, tees create a branch, male adapters transition to threads and plugs cap a threaded opening. Pick the type that matches the layout before comparing anything else.
Size comes next. Spears lists its Schedule 80 CPVC fittings from 1/4" through 24", and the sampled parts range from a 1/4" elbow to a 3" plug. For tees, read the size as End x End x Middle Branch. A 3/4" x 3/4" x 1/2" reducing tee has 3/4" ends and a 1/2" branch.
Connection type is the third check when choosing CPVC Schedule 80 Fittings. The sampled elbows and tee are socket fittings. The male adapter is spigot x MIPT, and the plug is MIPT. Pair a threaded part with the mating thread on the equipment or the adjoining fitting, and use socket parts to join CPVC pipe.
Keep the whole system in mind. Stay with one manufacturer's fittings where practical, since Spears designs its Schedule 80 CPVC fittings with computer generated stress analysis and verifies them with numerous tests. Confirm the pipe schedule matches the fittings already in the run, and check the project spec and local code for approved materials and pressure requirements. Read each product description for notes, such as the note that product images may not be an exact representation of the item.
Frequently Asked Questions
What sizes do Spears Schedule 80 CPVC fittings come in?
Spears describes its Schedule 80 CPVC fittings as covering sizes from 1/4" through 24". The sample on the CPVC Schedule 80 Fittings page includes a 1/4" elbow, a 1-1/2" male adapter and a 3" plug. Confirm the exact size on each product listing.
How do I read the size of a reducing tee?
The size of a CPVC Schedule 80 reducing tee is measured as End x End x Middle Branch, per the Spears listing note. A 3/4" x 3/4" x 1/2" tee therefore has two 3/4" ends and a 1/2" middle branch.
What's the difference between a 90 and a 45 elbow in CPVC Schedule 80 fittings?
Spears lists a 1/4" 90 degree and a 1/4" 45 degree Schedule 80 CPVC elbow, both with socket connections. The 90 degree elbow makes a full turn in the run. The 45 degree elbow makes a shallower turn.
Which CPVC Schedule 80 fittings have threaded connections?
In the catalog sample, the 1-1/2" male adapter has a spigot x MIPT connection and the 3" plug has a MIPT connection. The sampled elbows and reducing tee are socket fittings. Check the connection type on each CPVC Schedule 80 fitting listing before ordering.
Are Spears Schedule 80 CPVC fittings tested?
Spears says its Schedule 80 CPVC fittings are subjected to numerous verification tests. The designs also use computer generated stress analysis, with material reinforcement placed uniformly in stress concentration areas for improved pressure handling capability.