
| Amperage: | 1 |
|---|---|
| Application: | Single-Stage (Heat/Cool) Heat Pump |
| Stages: | 1 Heat/1 Cool |
| Programmability: | 7 Day Programmable |
| User Interface: | Touchscreen |
| Mount: | Horizontal |
| Options: | Works with Sensor Fan Control Large Display Auto Changeover |
| Power Method: | Hardwired Battery |
| Changeover: | Auto Manual |
| Temperature Range (F): | 40°F - 99°F |
| Max Temp Differential: | 1°F |
| Operating Humidity: | 5 to 90% RH, non-condensing |
| Voltage: | Low voltage 24V 750mV |
| Wattage: | 15 to 25 |
| Wiring: | R, RC, C, W (O/B), Y, G, S1, S2 |
| Frequency: | 50 Hz 60 Hz |
| Color: | Premier White |
| Height: | 4-9/16" |
| Width (Inches): | 6" |
| Depth (Inches): | 1-1/4" |
| Wireless: | No |
| Humidity Control: | No |
No, only the VisionPRO TH8321 models can display humidity.
The TH8110U1003 thermostat will not. You would need to use a TH8320U1008 unit.
This thermostat can handle both (as long as the heating an cooling are each single-stage). This is a 1 heat/1 cool thermostat.
Yes, this thermostat can be used on a hot water baseboard system.
Yes sir!!!
Yes, this is the replacement recommended by the manufacturer.
The manufacturer is not familiar with that part number, but TH8110U thermostats will operate correctly with the C7089U1006 outdoor sensor and C7189U1005 indoor sensor.
Yes. Please refer to pages 26 and 27 of the following manual for more information: http://s3.pexsupply.com/manuals/1296481515802/45690_PROD_FILE.pdf
This thermostat can set the fan to 'on' (fan runs continuously), 'auto' (fan follows fan program schedule), or 'circ' (fan runs randomly about 35% of the time).
No, you cannot.
This model does have auto-changeover capabilities. You will need to change installer setup number 0300. See page 17 in the following manual for more information: http://s3.pexsupply.com/manuals/1296481515802/45690_PROD_FILE.pdf