Lochinvar Solution boilers are gas-fired residential heating boilers built for a fast, low-labor install in tight mechanical rooms. The line spans 45,000 to 260,000 Btu/hr input and runs on natural gas or propane with atmospheric B-vent, so a contractor can match output to a home's heat loss without stepping up to a larger commercial platform. Every connection, gas, water, and vent, comes off the top of the unit and arrives pre-piped with a pumped performance loop, cutting down the fitting and wiring work a typical cast iron replacement requires. That top-connection layout is the detail contractors ask about most, since it lets a Solution boiler go into a space where a bulkier boiler simply would not clear the surrounding pipe and duct work.
Subcategories
Buying Guide
Start by calculating the home's heat loss and matching it to a Solution model's Btu/hr input rather than sizing up out of habit. Because the line runs from 45,000 up to 260,000 Btu/hr, most single-family replacements land comfortably in the lower-to-middle range, and oversizing adds short-cycling that shortens component life without improving comfort. Confirm venting next: Solution boilers use atmospheric B-vent by default, with optional PVC or CPVC vent kits for installs that need a sidewall termination instead of a chimney.
Clearance is the next filter, and it is where the Solution line earns its reputation. Because gas, water, and vent connections all land on top of the unit and arrive pre-piped with a pumped performance loop, it fits into closets and mechanical rooms that would reject a bottom-connected cast iron boiler of similar output. Measure the actual installation footprint against the unit's compact dimensions before ordering, especially on a replacement where the old boiler was shoehorned into a non-standard space.
Decide separately how domestic hot water will be handled, since the Solution line is a heating-only boiler rather than a combi unit. Most installs pair it with an indirect water heater tank piped off the boiler loop, so budget for that tank and its connections as part of the same job rather than an afterthought. Finally, factor in the 20-year limited heat exchanger warranty when comparing total cost against a shorter-warranty competitor, since that coverage period offsets a higher upfront price over the life of the system. Getting the sizing, venting, and DHW plan right up front keeps the compact Solution footprint from becoming a liability during a callback.
Frequently Asked Questions
What Btu/hr range does the Lochinvar Solution line cover?
Solution heating boilers span 45,000 to 260,000 Btu/hr input, which covers most single-family homes and small multi-zone systems without moving up to a commercial-class boiler.
Does a Solution boiler supply domestic hot water on its own?
No. The Solution line is a heating-only boiler, so domestic hot water is typically produced by pairing it with a separate indirect water heater tank on the same loop.
What venting does a Solution boiler require?
Solution boilers use atmospheric B-vent by default, with optional PVC or CPVC vent kits available when a sidewall termination is a better fit than a chimney.
Why do installers favor the Solution line for tight mechanical rooms?
All piping and venting connections land on top of the unit and arrive pre-piped with a pumped performance loop, so the boiler needs less surrounding clearance than a bottom-connected cast iron unit of similar output.
What efficiency rating do Solution boilers carry?
The line is rated at 84% AFUE, which fits standard atmospheric-vent replacement jobs where a condensing boiler's higher upfront cost isn't justified by the venting or fuel savings involved.