Non-Programmable Braeburn Thermostats give a fixed temperature setpoint without scheduling features, built for tenants, rental units, and simple residential systems. The lineup spans Builder Series and Economy Series models, including single-stage units like the 1020NC rated for 1 heat and 1 cool stage. That model runs on 24 VAC or two AA alkaline batteries, holds a temperature control range of 45 to 90 degrees Fahrenheit, and reads accurate to within plus or minus 1 degree Fahrenheit. A 2 square inch backlit LCD keeps the display readable in dim mechanical closets. Contractors choose non-programmable models for straightforward heat/cool or heat pump systems where occupants want simple manual control rather than programmed schedules, and for rental properties where a simpler interface means fewer callback calls.
Subcategories
Buying Guide
Confirm the number of heat and cool stages the existing system requires before selecting a model. Non-Programmable Braeburn Thermostats are available in single-stage 1 heat/1 cool configurations, like the 1020NC, as well as 2 heat/1 cool configurations for systems with staged heating and single-stage cooling. Installing a thermostat with fewer stages than the equipment supports leaves capacity unused, while too few stages on the thermostat can prevent proper equipment operation. Check power source compatibility next. Models like the 1020NC run on either 24 VAC system power or two AA alkaline batteries, which gives flexibility on retrofit jobs where existing wiring may not include a common wire. Confirm whether the installation site has 24 VAC available or will rely on battery power before finalizing the model. Decide between Builder Series and Economy Series based on budget and job type. Builder Series units suit new construction and standard replacements, while Economy Series units fit rental properties or budget-driven jobs. Both series retain settings through power loss via non-volatile memory, so neither compromises on that basic reliability feature. Finally, verify the temperature control range and display type meet the application's needs, particularly in mechanical closets or low-light installations where a backlit display improves technician and occupant readability.
Frequently Asked Questions
What does non-programmable mean on a Braeburn thermostat?
Non-programmable means the thermostat holds a single manually set temperature rather than following a daily or weekly schedule. Occupants adjust the setpoint directly rather than programming time-based changes. This style suits rental units and simple residential systems where scheduling features add unnecessary complexity.
How many heating and cooling stages do these thermostats support?
Non-Programmable Braeburn Thermostats range from single-stage 1 heat/1 cool models like the 1020NC to 2 heat/1 cool models like the 1220NC. Stage count needs to match the connected furnace, air conditioner, or heat pump. Installing a thermostat with the wrong stage count can prevent the system from using all its available capacity.
Can these thermostats run on batteries instead of system wiring?
Yes, models such as the 1020NC operate on either 24 VAC system power or two AA alkaline batteries. Battery power gives flexibility on retrofit jobs where a common wire is not present. Non-volatile memory retains temperature settings regardless of which power source is used.
What is the difference between Builder Series and Economy Series models?
Builder Series models are positioned for new construction and standard replacement work with a backlit LCD display. Economy Series models are Braeburn's lower-cost non-programmable option, suited to rental properties and budget-driven jobs. Both series still offer single-stage and multi-stage configurations.
What temperature range and accuracy do these thermostats offer?
The 1020NC model offers a 45 to 90 degree Fahrenheit control range with accuracy of plus or minus 1 degree Fahrenheit. Other models in the line share similar display and control specifications. Checking the specific model's published range confirms it fits the application's comfort requirements.