PEX Press Reducing Tees are fittings that join PEX tubing of varying sizes, with the three sizes labeled A x B x C. The page lists Viega reducing tees such as the 1/2-inch x 3/8-inch x 3/8-inch tee, along with Viega zero lead bronze tees with attached sleeves and a Bluefin lead free brass tee with an attached sleeve. Listed PEX sizes run from 3/8-inch to 3/4-inch. Material matters on this page. The Bluefin tee is noted as susceptible to dezincification and not high DZR rated, so water conditions factor into the choice. Contractors reach for a reducing tee when a branch needs a different size than the run it taps. Selecting the correct size, material and sleeve style for each branch keeps a PEX press system consistent from the main to the fixture.
Subcategories
Buying Guide
Start with the three sizes. A reducing tee is labeled A x B x C, so note the tubing size at each port before choosing a fitting. The page shows PEX sizes of 3/8-inch, 1/2-inch and 3/4-inch across its listed tees.
Next, choose the material. Viega lists its zero lead bronze reducing tees with attached sleeves, while the Bluefin tee is lead free brass with alloy C46500. Material decides where a fitting belongs, so read the listing notes before ordering.
Then weigh water conditions. The Bluefin tee is noted as susceptible to dezincification and not high DZR rated, and it should not be used where brass parts may be exposed to hard water with high sulfur or mineral content. A poly PEX or brass equivalent can be used in hard water conditions.
Decide whether an attached sleeve is needed. The Viega bronze tees and the Bluefin tee are listed with attached sleeves, so confirm the sleeve style on each listing.
When comparing PEX Press Reducing Tees, treat each listing as its own product. A specification noted on one tee does not apply to the others, so size, material and sleeve style should be checked item by item. Use the product record as the final check before ordering.
Frequently Asked Questions
What is a PEX press reducing tee used for?
PEX Press Reducing Tees join PEX tubing of varying sizes and are labeled A x B x C. Contractors use them where a branch needs a different tubing size than the run.
What sizes of PEX press reducing tees are listed?
The PEX press reducing tees on this page include 1/2-inch x 3/8-inch x 3/8-inch, 1/2-inch x 1/2-inch x 3/4-inch, 3/4-inch x 1/2-inch x 1/2-inch, 3/4-inch x 1/2-inch x 3/4-inch and 3/4-inch x 3/4-inch x 1/2-inch. Each listing shows its own PEX sizes, so confirm before ordering.
Do PEX press reducing tees come in zero lead bronze?
Viega lists zero lead bronze PEX press reducing tees with attached sleeves, including 1/2-inch x 1/2-inch x 3/4-inch and 3/4-inch x 1/2-inch x 1/2-inch. Material varies by listing, so the product record should be checked.
Can a lead free brass PEX press reducing tee be used with hard water?
The Bluefin 3/4-inch x 3/4-inch x 1/2-inch PEX press reducing tee is noted as susceptible to dezincification and not high DZR rated. It should not be used where brass parts may be exposed to hard water with high sulfur or mineral content. A poly PEX or brass equivalent can be used in hard water conditions.
Which PEX press reducing tees list an attached sleeve?
The Viega zero lead bronze tees and the Bluefin lead free brass tee on this page are listed with attached sleeves. Sleeve details vary by product, so each PEX press reducing tee listing should be read before ordering.