Rheem Installation Parts cover the motor mounting hardware technicians need to properly support a direct drive blower motor inside a Rheem furnace or air handler. Belly band motor mount kits, such as the AS-53148 series, wrap around the motor at multiple support points and come in frame-size-specific versions, including a 42 frame kit and a 48 frame kit, to match different motor sizes. Support-bracket bearings, including the AE-71650-01, work alongside these mount kits to help hold the motor in position within the housing. Rubber cushioning built into these kits reduces vibration and noise transmitted through the cabinet during operation. Replacing a worn belly band or bearing restores quiet, stable motor operation without needing to replace the entire blower assembly.
Subcategories
Buying Guide
Replacing a Rheem blower motor mount starts with identifying the motor's frame size, since belly band kits like the AS-53148 series come in frame-specific versions, including 42 frame and 48 frame variants, and a mismatched kit won't properly support the motor. Confirming the original part number on the furnace or air handler's motor or mount, rather than guessing from a general description, prevents ordering a kit that doesn't fit the cabinet's support legs. Rheem Installation Parts in this category typically get replaced together during a single service call: a hardened or cracked belly band cushion is often accompanied by a worn support-bracket bearing, so inspecting both components before closing up the unit avoids a repeat trip for a second failed part. Noise and vibration are usually what bring a technician out for this repair in the first place, since a blower motor rattling against its housing points to a support-mount problem rather than a motor failure. Confirming the mount is the actual cause, rather than a bent blower wheel or loose duct connection, before ordering parts saves a wasted purchase. Original manufacturer parts, like Rheem's own AS-53148 and AE-71650 series, are built to the same frame dimensions as the original equipment, which matters for keeping the motor properly aligned within the housing after the repair. Technicians stocking a service truck for Rheem furnace and air handler calls benefit from carrying both a common frame-size belly band kit and a matching bearing, since the two parts fail together often enough to warrant replacing them as a pair.
Frequently Asked Questions
What does a belly band motor mount kit do?
A belly band motor mount kit wraps around a direct drive blower motor at multiple support points to hold it securely inside a furnace or air handler cabinet. Rubber cushioning built into the kit isolates the motor from the metal housing, cutting down on vibration and noise during operation. Technicians replace a belly band when the original cushioning has hardened or cracked, letting the motor rattle against its mount. Rheem's AS-53148 series comes in frame-specific sizes to match different blower motor dimensions.
How does a technician know if a Rheem blower motor mount needs replacement?
A furnace or air handler making a rattling or buzzing noise near the blower motor often points to a worn belly band mount rather than a failing motor. Visually inspecting the belly band's rubber cushioning for cracking or hardening confirms whether the mount is the source of the vibration. Checking the support-bracket bearing at the same time catches a second worn part before it causes a repeat service call. Ruling out a bent blower wheel or loose duct connection first prevents replacing a mount that wasn't actually the problem.
What frame sizes do Rheem belly band motor mount kits come in?
Rheem's AS-53148 series belly band motor mount kits come in frame-specific sizes, including a 42 frame size version and a 48 frame size version, to match different blower motor dimensions. Ordering the wrong frame size kit results in a mount that doesn't properly support or center the motor inside the cabinet. Confirming the original motor's frame size or the existing mount's part number before ordering avoids a fit problem. Frame size is typically stamped on the motor's nameplate alongside other motor specifications.
Should the support-bracket bearing be replaced along with the belly band?
A support-bracket bearing, such as Rheem's AE-71650-01, often wears out around the same time as the belly band's rubber cushioning since both components support the same blower motor under continuous vibration. Replacing both parts during the same service call reduces the chance of a repeat visit for a second failed component. Technicians who find a cracked or hardened belly band cushion should inspect the paired bearing before closing up the unit. Stocking both parts together on a service truck speeds up this type of repair.
Can a universal belly band mount replace a Rheem-specific kit?
A frame-specific Rheem belly band kit, like the AS-53148 series, is built to match the exact dimensions of Rheem's direct drive blower motors, keeping the motor properly centered and supported inside the cabinet. A universal or generic mount may fit loosely or fail to isolate vibration as effectively as a manufacturer-matched kit. Technicians confirming the motor's frame size and original part number before ordering keep the replacement mount properly matched to the equipment. Using the original manufacturer's part number is the most reliable way to confirm equivalent fit and vibration isolation.