Sentinel X300 New System Cleaner (Quart)

Specifically designed for cleaning new closed loop hydronic heating systems, Sentinel X300 System Cleaner is a powerful, heavy-duty cleaner for the removal of installation debris and grease. This prepares the system for the addition of an inhibitor, which will protect the system components and prolong their effective life.

KEY FEATURES:

• Removes oils, greases, flux residues, etc.
• Prepares and protects metal surfaces
• Helps prevent pin-holing
• Suitable for all metals including aluminum
• Non-acid, non-caustic
• No neutralization procedure is needed
• Easy to handle
• Manufactured under a quality system comforming to ISO9001

1 quart of Sentinel X300 is sufficient to treat a typical residential system of 25 gallon. Larger systems should be dosed at 1% of system water. If the system is new, this should be at the time it is first filled. For best results, the water should be circulated at normal operating temperature for between 1-2 hours but no longer than 24 hours. If it is not possible to heat the water, the circulation time must be compensated for by extending the time to at least 24 hours but no longer than one week.

Drain and flush the system before refilling and treating with Sentinel X100 Inhibitor.