Specialty Connectors are plumbing fittings for specific jobs, and the Fernco examples listed here include downspout connectors, a clothes washer hose connector, and one-piece expansion joints. The downspout connectors stretch easily over most common downspouts and drain pipes to seal out debris and pests, and they are listed for aluminum, steel, or plastic downspouts and cast iron, spiral, corrugated, or plastic drain pipe. The Hose Grip washer connector holds washing machine hoses securely in their standpipe drains and has 4 vents for air flow during washer discharge. The expansion joints allow for thermal expansion and contraction of drain, waste, and vent pipes, and the listed 1-1/2 inch and 2 inch sizes carry a maximum test pressure of 4.3 PSI. Because each connector solves one specific problem, matching the fitting to the pipe, size, and application matters before ordering.
Subcategories
Buying Guide
Start with the application, because these fittings cover very different jobs. A downspout connector joins a downspout to drain pipe, a Hose Grip holds washer hoses in a standpipe, and an expansion joint accommodates thermal movement in drain, waste, and vent piping.
Next, match size and pipe material. The listed downspout connectors come in 3 inch by 3 inch and 4 inch by 3 inch sizes, and each description names the drain pipe and downspout shape it fits, so read it closely before ordering. Fernco lists them for aluminum, steel, or plastic downspouts and cast iron, spiral, corrugated, or plastic drain pipe. The expansion joints come in 1-1/2 inch and 2 inch sizes and must match the pipe they serve.
Then check ratings and construction. When comparing Specialty Connectors, note that the listed expansion joints carry a maximum test pressure of 4.3 PSI, so confirm the system's test procedure stays within that figure. Fernco describes the one-piece expansion joints as having internal stops for positive positioning, no sliding parts to malfunction, and no packing to jam, freeze, or leak. The Hose Grip is a washer hose holder with 4 vents for air flow during discharge, so it suits laundry standpipe installations rather than general drain connections.
Finally, verify details on the product page and have a qualified plumber confirm fit and local code requirements.
Frequently Asked Questions
What are Specialty Connectors used for?
Specialty Connectors cover specific plumbing jobs. The listed Fernco examples include downspout connectors, a clothes washer hose connector, and one-piece expansion joints for drain, waste, and vent pipes.
What do the Fernco downspout connectors fit?
The Fernco downspout connectors in Specialty Connectors are listed for aluminum, steel, or plastic downspouts and cast iron, spiral, corrugated, or plastic drain pipe. Listed sizes include 3 inch by 3 inch and 4 inch by 3 inch.
What does the Fernco Hose Grip do?
The Hose Grip, listed with Specialty Connectors, holds washing machine hoses securely in their standpipe drains. It has 4 vents to allow air flow during discharge from the washer.
Why use a Fernco expansion joint in DWV piping?
Fernco's one-piece expansion joints allow for thermal expansion and contraction of drain, waste, and vent pipes. They eliminate offsets normally used to accommodate that movement and have no sliding parts to malfunction.
What is the maximum test pressure on Fernco expansion joints?
The listed Fernco 1-1/2 inch and 2 inch expansion joints in Specialty Connectors have a maximum test pressure of 4.3 PSI. Check the product page for details before pressure testing a system.