Therm-X-Trol Expansion Tanks absorb the extra volume created when water heats and expands inside a closed potable water system, protecting the water heater and relief valve from repeated pressure spikes. The lineup runs from compact in-line models like the ST-5 and ST-12, sized at 2.0 to 4.4 gallons, up to freestanding tanks from the ST-25V through the ST-210V, ranging from 10.3 to 86 gallons for larger homes and light commercial systems. Every tank uses a heavy-duty butyl diaphragm rated to NSF/ANSI 61 for potable water contact, separating the water side from a factory air charge that's set before installation. Maximum working pressure across the line reaches 150 PSIG, with most models rated to 200 degrees Fahrenheit. Matching tank size and precharge to the water system's static pressure keeps a Therm-X-Trol Expansion Tank absorbing expansion correctly instead of transmitting pressure spikes straight to the relief valve.
Subcategories
Buying Guide
Sizing a Therm-X-Trol Expansion Tank starts with the type of water heater in the system and the volume of water that needs somewhere to go as it expands. A standard tank-type water heater in a typical home usually pairs with an in-line model like the ST-5 or ST-12, sized between 2.0 and 4.4 gallons, while a tankless water heater calls for the ST-1 model built for that lower operating temperature. Larger residential systems or light commercial buildings with higher water demand move up to a freestanding model, with the ST-25V through ST-210V lineup covering 10.3 to 86 gallons.
Precharge matters just as much as tank size when sizing Therm-X-Trol Expansion Tanks correctly. Factory precharge should match the static water supply pressure feeding the system, which is 50 PSIG on the in-line ST-5 and ST-12 models and 40 PSIG on the larger freestanding lineup. A tank precharged well above or below the actual static pressure won't absorb expansion correctly, leading to a relief valve that drips more than it should or a water heater that sees repeated pressure spikes.
Working pressure and temperature ratings deserve a check against the system. Every tank in the lineup handles up to 150 PSIG maximum working pressure, and standard models run up to 200 degrees Fahrenheit, well above what a typical residential water heater produces. Confirming precharge against actual static pressure before installation remains the single detail most likely to cause a callback if skipped.
Frequently Asked Questions
What's the difference between the in-line and freestanding Therm-X-Trol models?
In-line models like the ST-5 and ST-12 install directly into the water line and hold 2.0 to 4.4 gallons of acceptance volume, fitting compact mechanical spaces. Freestanding models from the ST-25V through the ST-210V mount as standalone tanks and cover 10.3 to 86 gallons for larger residential and light commercial systems. Factory precharge differs between the two tiers as well, at 50 PSIG for in-line models and 40 PSIG for freestanding models.
How does precharge affect a Therm-X-Trol Expansion Tank's performance?
Factory precharge should match the static water supply pressure feeding the system for the tank to absorb expansion correctly. A tank precharged well below the actual static pressure fills with water too early and won't have room left for expansion. Checking static pressure with a gauge before installation confirms whether the factory precharge still matches the system.
Can a Therm-X-Trol tank pair with a tankless water heater?
The ST-1 model is built specifically for tankless water heater systems, still protecting the closed system from pressure spikes even without a storage tank present. Maximum operating temperature on the ST-1 is rated at 140 degrees Fahrenheit, lower than the 200 degree rating on standard models in the lineup. Installers typically mount it close to the tankless unit's cold water inlet per the water heater manufacturer's instructions.
What's the maximum working pressure on a Therm-X-Trol tank?
Every tank across the Therm-X-Trol lineup handles up to 150 PSIG maximum working pressure. Standard models also carry a 200 degree Fahrenheit maximum operating temperature rating, well above what a typical residential water heater produces during normal operation. The ST-1 tankless model is the exception, rated to 140 degrees Fahrenheit instead.
What is the diaphragm made of inside a Therm-X-Trol tank?
Therm-X-Trol tanks use a heavy-duty butyl diaphragm rated to NSF/ANSI 61 for safe contact with potable water. The diaphragm separates the water side of the tank from the factory air charge, allowing the tank to absorb expanded water without mixing it with the precharged air. A steel shell with multi-dome construction surrounds the diaphragm for structural strength.