Apply to be a TradeMaster!
Filter menu expanded

Filters

5 items
Reset

SORT

Product Availability
–

Show In Stock Only (5)

Application
–

3/8" PEX (1)
1/2" PEX (3)

Review Score
–

(3)
(1)

Price Range
–

$10 to $15 (2)
$200 to $300 (2)
$400 to $500 (1)

Uponor Joist Trak Panels

Help Face
Need a little help?
5 items
Grid
List
Compare
Product Image of Wirsbo Joist Trak, 1/2" Heat Transfer Panel
$10.57 each
BOX UP & SAVE 13%
$183.00 box of 20
$9.15 each
In Stock
Get 19,752 by Mon, Nov 23
In Stock
Get 19,752 by Mon, Nov 23
Compare
Product Image of 4 ft. x 4" Wide - 1/2" PEX Aluminum Heat Transfer Omega Plates (50 Pack)
$237.99 each
In Stock
Get 250 by Mon, Nov 23
In Stock
Get 250 by Mon, Nov 23
Compare
Product Image of 2 ft. x 4" Wide - 1/2" PEX Aluminum Heat Transfer Omega Plates (100 Pack)
$222.99 each
In Stock
Get 124 by Mon, Nov 23
In Stock
Get 124 by Mon, Nov 23
Compare
Product Image of Wirsbo Joist Trak, 3/8" Heat Transfer Panel
$12.47 each
BOX UP & SAVE 11%
$223.00 box of 20
$11.15 each
In Stock
Get 826 by Mon, Nov 23
In Stock
Get 826 by Mon, Nov 23
Compare
Product Image of Omega Aluminum Heat Transfer Plates for 1/2" Tubing (Box of 100)
Omega Aluminum Heat Transfer Plates for 1/2" Tubing (Box of 100)
SKU: 6110702
Mr. PEX
SKU: 6110702
Brand: Mr. PEX
(1)
$429.33 each
In Stock
Get 5 by Mon, Nov 23
In Stock
Get 5 by Mon, Nov 23
Resources
FAQs, Manuals & Videos
Videos
Articles
More About Uponor Joist Trak Panels

Uponor Joist Trak panels are extruded aluminum heat transfer plates that installers fasten between floor joists to distribute heat from PEX tubing across a subfloor for radiant floor heating. Each panel accepts 3/8 inch or 1/2 inch Uponor PEX tubing and measures roughly 4 feet long, sized to span the standard joist bay in new construction and retrofit applications alike. Plumbing and hydronic contractors turn to this system when a project calls for radiant heat without the added floor height of a poured slab or overpour method, since the panels mount directly to the underside of the subfloor. The aluminum construction spreads heat evenly along the tubing run rather than concentrating warmth at isolated contact points, which keeps floor surface temperature more consistent from wall to wall. Confirming tubing size and joist spacing against the panel's dimensions before ordering keeps the installation on track and avoids a mismatched fit in the field.

Subcategories

  • 3/8 Inch Joist Trak Panels: 3/8 inch Joist Trak panels accept Uponor's smaller PEX tubing size and suit tighter joist bays or lower flow rate zones. Installers select this size when a heating loop's design calls for the reduced tubing diameter rather than the larger 1/2 inch option. Each panel measures roughly 4 feet long and 3.5 inches wide, matching standard 16 inch on center joist framing. Packaging comes 20 panels per box, making it straightforward to calculate material needs for a given run length.
  • 1/2 Inch Joist Trak Panels: 1/2 inch Joist Trak panels pair with Uponor's larger PEX tubing size for zones that need higher flow capacity or longer tubing runs. Hydronic contractors size a job to this option when the heat loss calculation for a room favors the larger tubing diameter. The panel's aluminum construction carries heat across the same 4 foot length as the 3/8 inch version, differing mainly in the tubing channel size. Confirming the tubing diameter ordered for a project matches the panel size prevents a fitment mismatch during installation.
  • Joist Trak Fasteners and Accessories: Fasteners and accessories secure Joist Trak panels to the underside of the subfloor and hold the PEX tubing in place within each panel's channel. Installers use staples or screws rated for the application to keep panels from shifting as the system heats and cools. Insulation typically installs below the panels to direct heat upward into the living space rather than downward into a basement or crawlspace. Accessory availability depends on the specific installation method a contractor is using for a given job.
  • Joist Trak Tubing: Uponor PEX tubing designed for use with Joist Trak panels completes the radiant loop once panels are fastened in place. Selecting tubing in the size that matches the installed panel, either 3/8 inch or 1/2 inch, keeps the heat transfer contact area consistent along the run. Contractors calculate total tubing length based on room area and loop spacing before ordering. Matching tubing and panel size is a required step, since the two are not interchangeable within a single loop.
  • Buying Guide

    Selecting Uponor Joist Trak panels starts with matching the tubing size to the panel, since the panels come in versions sized for either 3/8 inch or 1/2 inch Uponor PEX tubing and the two are not interchangeable within the same loop. Contractors working on a retrofit or remodel often favor Uponor Joist Trak Panels over a poured or overpour radiant system specifically because the panels mount to the underside of an existing subfloor, avoiding the added floor height and cure time that come with a slab pour. Joist spacing matters as well. Each panel measures about 4 feet long and 3.5 inches wide, dimensions that align with standard 16 inch on center framing, so confirming joist layout before ordering avoids cutting or piecing panels in the field. Packaging comes 20 panels per box, which simplifies estimating material quantities once a contractor has calculated total run length from the project's heat loss numbers. Insulation below the panels directs heat upward into the room rather than losing it downward into an unconditioned space below, so budgeting for insulation alongside the panels themselves keeps the system performing as designed. Fasteners suited to the subfloor material, whether staples or screws, hold panels in place through repeated heating and cooling cycles without loosening over time. Contractors should also confirm the heating loop's design flow rate against the tubing size chosen, since undersized tubing on a long run can restrict flow and leave a room underheated even when the panels themselves are installed correctly.

    Frequently Asked Questions

    What PEX tubing sizes work with Uponor Joist Trak panels?

    Joist Trak panels are available in versions sized for 3/8 inch or 1/2 inch Uponor PEX tubing. The panel size and tubing size need to match within a single loop.

    How long is a standard Joist Trak panel?

    Each panel measures approximately 4 feet long and 3.5 inches wide, sized to align with standard 16 inch on center joist framing.

    How many panels come in a box?

    Joist Trak panels are packaged 20 per box, which helps with estimating material quantities for a given run length.

    Why choose Joist Trak panels over a poured radiant floor system?

    Joist Trak panels mount to the underside of an existing subfloor between joists, which avoids the added floor height and cure time of a poured or overpour radiant system. Contractors typically choose Joist Trak panels for retrofit and remodel projects for that reason.

    What holds the panels in place under the subfloor?

    Fasteners such as staples or screws secure the panels to the underside of the subfloor, and insulation typically installs below the panels to direct heat upward into the room.

Didn't find what you're looking for? 
Let us know
.