Viega Supply & Return Manifolds are stainless steel manifolds used in closed loop hydronic heating, cooling, and snow melting systems. The ProRadiant line includes models with shut off and balancing valves and flow meters for each circuit. Each flow meter allows flow settings to a maximum of 2 gpm, with a maximum of 18 gpm per manifold. Loop counts run from 2 loops on the 16030 to 12 loops on the 16040. The preassembled 1-1/4" diameter supply and return manifolds come attached to two 6-5/8" spacing brackets for compact remote mounting. Choosing the correct loop count and flow setup early matters because the manifold sets how each radiant circuit is balanced and shut off. Pairing the manifold with the loop layout is the first decision on any radiant job.
Subcategories
Buying Guide
Start with the loop count. Count the radiant circuits the manifold must serve, then choose a model with that many loops, such as the 16030 for 2 loops, the 16032 for 4 loops, the 16034 for 6 loops, or the 16040 for 12 loops. Leaving spare capacity is a design decision, so confirm it against the system layout.
Next, decide whether flow meters are needed. Flow meter models give a graduated flow setting on each circuit, with a maximum of 2 gpm per meter. Shut-off and balancing models, such as the 16401 for 3 loops or the 16407 for 9 loops, are listed without flow meters in the product name. Confirm the hardware on the listing against the balancing method planned for the job.
When comparing Viega Supply & Return Manifolds, check total flow too. The flow meter models are rated for a maximum of 18 gpm per manifold, so total the design flow of every circuit and confirm the sum stays within that limit. Also check physical details: the supply and return manifolds are 1-1/4" diameter on two 6-5/8" spacing brackets, with 1-1/4" union connections and 1" NPT removable end caps. Finally, plan the loop connections and related accessories before ordering, since matching hardware avoids delays on site.
Frequently Asked Questions
What are Viega supply and return manifolds used for?
Viega Supply & Return Manifolds are stainless steel manifolds used in closed loop hydronic heating, cooling, and snow melting systems. Models such as the 16031 provide shut off and balancing valves with flow meters for each circuit. Confirm the loop count and hardware on the listing.
How many loops do the Viega ProRadiant manifolds come in?
Viega ProRadiant supply and return manifolds on SupplyHouse range from 2 loops, such as the 16030, to 12 loops, such as the 16040. Other examples include the 16031 at 3 loops, the 16032 at 4 loops, and the 16034 at 6 loops. Shut-off and balancing models add 8 and 9 loop sizes such as the 16406-VIEGA and 16407-VIEGA.
What is the maximum flow on a Viega flow meter manifold?
Each flow meter and balancing valve on a Viega ProRadiant flow meter manifold allows a graduated flow setting to a maximum of 2 gpm. The manifold maximum is 18 gpm. Total the circuit flows to confirm a Viega supply and return manifold covers the design.
What connections and mounting do the Viega stainless manifolds use?
The preassembled 1-1/4" diameter stainless supply and return manifolds come attached to two 6-5/8" spacing brackets. They have 1-1/4" union connections and 1" NPT removable end caps. Viega flow meter manifolds such as the 16030 and 16031 list these specs.
Do I need flow meters on a radiant manifold?
Flow meter models such as the 16034 show a graduated flow setting on each circuit, while shut-off and balancing models such as the 16401 are listed without flow meters in the product name. Choose based on the balancing method planned for the system. Confirm the hardware on the listing before ordering the Viega supply and return manifold.