Apply to be a TradeMaster!
Filter menu expanded

Filters

15 items
Reset

SORT

Product Availability
–

Show In Stock Only (5)

Voltage
–

440v (2)
208V (11)
230V (11)
480V (2)
575v (2)

Cord Length
–

10' (4)
25' (10)
50' (1)

Review Score
–

(2)
(6)

Price Range
–

$800 to $900 (1)
$900 to $1000 (8)
$1000 to $1500 (6)

LE100 Series 1 HP

Help Face
Need a little help?
15 items
Grid
List
Compare
Product Image of 1 HP Auto Submersible Pump w/ Wide-Angle Piggyback Float Switch - 208/230v - 10 ft Cord - 2" Discharge, LE102A2
$948.00 each
In Stock
Get 1 by Mon, Nov 23
In Stock
Get 1 by Mon, Nov 23
Compare
Product Image of 1 HP Auto Submersible Pump w/ Wide-Angle Piggyback Float Switch - 230v - 25 ft Cord - 2" Discharge
$978.00 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of 1 HP Manual Submersible Sewage Pump - 208/230v - 10 ft Cord - 2" Discharge, LE102M2
$895.50 each
In Stock
Get 3 by Mon, Nov 23
In Stock
Get 3 by Mon, Nov 23
Compare
Product Image of 1 HP Manual Submersible Sewage Pump - 208/230v - 25 ft Cord - 2" Discharge, LE102M2-2
$989.01 each
In Stock
Get 13 by Tue, Nov 24
In Stock
Get 13 by Tue, Nov 24
Compare
Product Image of 1 HP Auto Submersible Pump w/ Wide-Angle Piggyback Float Switch - 208/230v - 10 ft Cord - 3" Discharge, LE102A3
$948.00 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of 1 HP Auto Submersible Pump w/ Wide-Angle Piggyback Float Switch - 208/230v - 25 ft Cord - 3" Discharge, LE102A3-2
$978.00 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of 1 HP Manual Submersible Sewage Pump - 208/230v - 10 ft Cord - 3" Discharge, LE102M3
$970.68 each
In Stock
Get 1 by Tue, Nov 24
In Stock
Get 1 by Tue, Nov 24
Compare
Product Image of 1 HP Manual Submersible Sewage Pump - 208/230v - 25 ft Cord - 3" Discharge, LE102M3-2
$912.00 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of 1 HP Manual Submersible Sewage Pump - 208/230v - 25 ft Cord - 2" Discharge - 3 Phase, LE103M2-2
$1,293.75 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of 1 HP Manual Submersible Sewage Pump - 208/230v - 25 ft Cord - 3" Discharge - 3 Phase, LE103M3-2
$1,392.22 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of 1 HP Manual Submersible Sewage Pump - 440/480v - 25 ft Cord - 2" Discharge - 3 Phase, LE104M2-2
$1,293.75 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of 1 HP Manual Submersible Sewage Pump - 440/480v - 25 ft Cord - 3" Discharge - 3 Phase, LE104M3-2
$1,293.75 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of 1 HP Manual Submersible Sewage Pump - 575v - 25 ft Cord - 2" Discharge - 3 Phase
$1,478.25 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of 1 HP Manual Submersible Sewage Pump - 575v - 25 ft Cord - 3" Discharge - 3 Phase
$1,478.25 each
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Backorder
Get it by Mon, Dec 21 - Fri, Jan 22
Compare
Product Image of LE102M2-5 1 HP, Sewage Pump, 1 PH, 208-230v, 50' Cord, 2" Discharge, Manual
$960.00 each
In Stock
Get 1 by Mon, Nov 23
In Stock
Get 1 by Mon, Nov 23
Resources
FAQs, Manuals & Videos
Articles
More About LE100 Series 1 HP

LE100 Series 1 HP pumps are submersible sewage ejector pumps built to move solids-laden wastewater from a basement, addition, or below-grade fixture up to a gravity sewer or septic line. Each pump runs a 1 horsepower motor at 1725 RPM on 60 Hz power, paired with a 2 inch solids handling passage that lets waste and debris pass through without clogging the impeller. Cast iron construction, including a Class 25 cast iron volute and housing, stands up to the abrasive solids these pumps handle daily. An oil-filled, hermetically sealed motor housing dissipates heat and keeps the windings protected from the wastewater surrounding the pump. Plumbers spec this series for basement bathrooms, laundry rooms, and other fixtures set below the main sewer line, where gravity alone can't move waste out of the building. Choosing a pump rated to handle real solids, not just clear water, keeps a basement fixture from backing up the first time it sees actual use.

Subcategories

  • 2 in Discharge Models: 2 inch discharge models cover the standard sewage ejector basin found in most residential basement installations, connecting directly to 2 inch discharge piping. Solids handling stays at 2 inch through this configuration, matching the discharge size to the passage size through the impeller. A 1 horsepower motor drives this configuration at 1725 RPM. Basement bathroom and laundry installations most commonly specify this discharge size.
  • 3 in Discharge Models: 3 inch discharge models step up the discharge piping size for installations feeding a longer or larger-diameter force main. Larger commercial basements or multi-fixture installations often call for this size when a single 2 inch line would restrict flow over a longer run. Solids handling capacity stays at 2 inch even on the larger discharge models. The same 1 horsepower, 1725 RPM motor drives both discharge configurations.
  • Automatic (Float Switch) Models: Automatic models come equipped with a wide angle mechanical float switch and a piggyback plug, letting the pump start and stop on its own as wastewater rises and falls in the basin. Plumbers install this configuration as a standalone unit without a separate control panel, which suits single-pump residential installations. The wide angle switch design reduces the chance of the float snagging on basin walls or piping. Piggyback plug wiring lets a technician bypass the switch for testing without rewiring the pump.
  • Manual (Non-Switched) Models: Manual models ship without an integrated float switch, relying instead on an external control panel or alternating relay to start and stop the pump. Contractors specify this configuration on duplex installations, where two pumps alternate duty through a shared control panel rather than each running its own float. Removing the onboard switch simplifies wiring in a panel-controlled system. The same cast iron construction and 1 horsepower motor carry over from the automatic models.

Buying Guide

Start with the application. A basement bathroom, laundry room, or wet bar set below the main sewer line needs a pump built to move solid waste up to the gravity line, not a sump pump designed for clear water only. Confirm the basin and discharge piping can accept a 2 inch solids passage before ordering, since pairing a capable pump with undersized piping bottlenecks flow regardless of what the pump itself can handle. Match discharge size to the piping already run or planned: 2 inch discharge suits most single-fixture residential jobs, while 3 inch discharge suits longer force mains or higher-flow commercial installations. Decide between automatic and manual configurations based on the control setup. A single-pump installation calls for the automatic float switch version, while a duplex system with an external control panel calls for the manual version instead, since the panel handles switching between the two pumps. The LE100 Series 1 HP line uses cast iron construction throughout the volute, impeller, and motor housing, standing up to the abrasive solids sewage ejector pumps handle daily better than lighter-duty alternatives built for clear water. Checking the shutoff head and flow rating against the actual vertical lift and pipe run length prevents installing an undersized pump that struggles to clear the basin during peak use, such as a full load of laundry combined with a shower running at the same time.

Frequently Asked Questions

What's the difference between the 2 inch and 3 inch discharge LE100 models?

Both discharge sizes share the same 1 horsepower motor and 2 inch solids handling capability, so the difference comes down to the piping the pump connects to rather than pumping capacity. 2 inch discharge models suit typical residential force main runs, while 3 inch discharge models suit longer runs or higher-flow installations where the larger pipe reduces friction loss. Matching discharge size to the piping already installed or planned avoids a mismatched connection at installation.

Does an LE100 pump need a separate control panel?

Automatic LE100 models include a built-in wide angle float switch and piggyback plug, so they run as standalone units without any separate control panel. Manual LE100 models skip the onboard switch and require an external control panel or alternating relay, which is standard on duplex installations running two pumps off one panel. Choosing the wrong version means either paying for a switch that goes unused in a duplex system or missing the switch entirely on a single-pump job.

How many solids can an LE100 pump handle?

LE100 pumps handle solids up to 2 inches in diameter, matching the passage through the impeller and the 2 inch discharge option. Coverage extends to typical residential sewage from toilets, laundry, and other basement fixtures tied into the ejector basin. Pairing the pump with an undersized basin or discharge line restricts flow even though the pump itself can pass 2 inch solids.

What keeps the LE100 motor from overheating inside a sealed basin?

LE100 motors use an oil-filled, hermetically sealed housing that dissipates heat away from the windings while keeping wastewater fully out of the motor compartment. Cast iron construction throughout the housing and volute adds further protection against the abrasive solids these pumps handle on every cycle. Sealed construction also allows fully submersible operation without risking motor damage during high water events in the basin.

How is an LE100 pump different from a standard sump pump?

An LE100 pump handles solid waste up to 2 inches in diameter, while a standard sump pump is built for clear or lightly debris-laden groundwater only and clogs quickly on real sewage. Cast iron construction and a 1 horsepower motor give the LE100 series enough power to lift solids-laden wastewater up to a gravity sewer or septic line. Installing a sump pump on a sewage application instead of an LE100 pump usually ends in a clogged impeller within the first few uses.

Didn't find what you're looking for? 
Let us know
.